Skip to main content
Pass Your MOT

1963 Rolls-Royce Unclassified MOT Pass Rate

Pass rate for Unclassified models manufactured in 1963, based on 91 real MOT test results.

84.6%
Pass Rate
15.4%
Fail Rate
91
Total Tests
52,418
Avg Mileage

Data from official DVSA MOT testing records

1963 Rolls-Royce Unclassified MOT Analysis

The 1963 Rolls-Royce Unclassified has an MOT pass rate of 84.6% based on 91 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 52,418 miles on the odometer. With a 15.4% failure rate, the 1963 Unclassified is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 1963 Rolls-Royce Unclassified is Brakes, responsible for 3.3% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Noise, emissions and leaks is the second most common issue at 2.2%. Lamps, reflectors and electrical equipment follows at 1.1%.

⚠ Based on limited data (91 tests)

Top failures specific to 1963 models only. The overall Unclassified page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Brakes3.3%3
2Noise, Emissions And Leaks2.2%2
3Lamps, Reflectors And Electrical Equipment1.1%1
4Suspension1.1%1
5Visibility1.1%1

Failures per 10,000 Miles

avg. 52,418 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Brakes0.63% per 10K miNoise, emissions and leaks0.42% per 10K miLamps & Electrical0.21% per 10K miSuspension0.21% per 10K miVisibility0.21% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Brakes0.633.3%3
Noise, emissions and leaks0.422.2%2
Lamps & Electrical0.211.1%1
Suspension0.211.1%1
Visibility0.211.1%1

Mileage Statistics

52,418
Mean
61,065
Median
4,145
25th Percentile
73,454
75th Percentile
2.94% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1963 Rolls-Royce Unclassified has an MOT pass rate of 84.6% based on 91 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 52,418 miles on the odometer. With a 15.4% failure rate, the 1963 Unclassified is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 1963 Rolls-Royce Unclassified, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). At 52,418 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Brakes — 3.3% of failures

Brakes issues account for 3.3% of MOT failures on 1963 Rolls-Royce Unclassified models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Noise, emissions and leaks — 2.2% of failures

Noise, emissions and leaks issues account for 2.2% of MOT failures on 1963 Rolls-Royce Unclassified models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.

Lamps, reflectors and electrical equipment — 1.1% of failures

Lamps, reflectors and electrical equipment issues account for 1.1% of MOT failures on 1963 Rolls-Royce Unclassified models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue