1996 Rover 111 Gsi MOT Pass Rate
Pass rate for 111 Gsi models manufactured in 1996, based on 44 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 111 Gsi cars tested in 1996. Want to see how cars built in 1996 hold up over time?
View 1996 Rover 111 Gsi vintage page → (22.7% current pass rate)1996 Rover 111 Gsi MOT Analysis
The 1996 Rover 111 Gsi has an MOT pass rate of 22.7% based on 44 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 69,681 miles on the odometer. With a 77.3% failure rate, the 1996 111 Gsi is rated as "Very Poor" for MOT reliability.
The leading cause of MOT failure for the 1996 Rover 111 Gsi is Suspension, responsible for 140.9% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Brakes is the second most common issue at 100.0%. Exhaust, Fuel and Emissions follows at 70.5%.
Top failures specific to 1996 models only. The overall 111 Gsi page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 140.9% | 62 |
| 2 | Brakes | 100.0% | 44 |
| 3 | Exhaust, Fuel And Emissions | 70.5% | 31 |
| 4 | Lamps, Reflectors And Electrical Equipment | 61.4% | 27 |
| 5 | Seat Belts And Supplementary Restraint Systems | 52.3% | 23 |
| 6 | Body, Structure And General Items | 47.7% | 21 |
| 7 | Tyres | 38.6% | 17 |
| 8 | Driver's View Of The Road | 15.9% | 7 |
| 9 | Steering | 13.6% | 6 |
| 10 | Items Not Tested | 6.8% | 3 |
| 11 | Road Wheels | 6.8% | 3 |
| 12 | Registration Plates And Vin | 4.5% | 2 |
Failures per 10,000 Miles
avg. 69,681 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 20.22 | 140.9% | 62 |
| Brakes | 14.35 | 100.0% | 44 |
| Emissions & Exhaust | 10.11 | 70.5% | 31 |
| Lamps & Electrical | 8.81 | 61.4% | 27 |
| Seat Belts | 7.50 | 52.3% | 23 |
| Body & Structure | 6.85 | 47.7% | 21 |
| Tyres | 5.54 | 38.6% | 17 |
| Visibility | 2.28 | 15.9% | 7 |
| Steering | 1.96 | 13.6% | 6 |
| Items Not Tested | 0.98 | 6.8% | 3 |
| Wheels | 0.98 | 6.8% | 3 |
| Registration Plates and VIN | 0.65 | 4.5% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1996 Rover 111 Gsi has an MOT pass rate of 22.7% based on 44 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 69,681 miles on the odometer. With a 77.3% failure rate, the 1996 111 Gsi is rated as "Very Poor" for MOT reliability.
If you own or are considering buying a 1996 Rover 111 Gsi, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. At 69,681 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Suspension — 140.9% of failures
Suspension issues account for 140.9% of MOT failures on 1996 Rover 111 Gsi models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Brakes — 100.0% of failures
Brakes issues account for 100.0% of MOT failures on 1996 Rover 111 Gsi models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Exhaust, Fuel and Emissions — 70.5% of failures
Exhaust, Fuel and Emissions issues account for 70.5% of MOT failures on 1996 Rover 111 Gsi models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.