Skip to main content
Pass Your MOT

1999 Rover 211i MOT Pass Rate

Pass rate for 211i models manufactured in 1999, based on 91 real MOT test results.

46.2%
Pass Rate
53.8%
Fail Rate
91
Total Tests
71,872
Avg Mileage

Data from official DVSA MOT testing records

This page shows all 211i cars tested in 1999. Want to see how cars built in 1999 hold up over time?

View 1999 Rover 211i vintage page โ†’ (46.5% current pass rate)

1999 Rover 211i MOT Analysis

The 1999 Rover 211i has an MOT pass rate of 46.2% based on 91 tests โ€” significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 71,872 miles on the odometer. With a 53.8% failure rate, the 1999 211i is rated as "Very Poor" for MOT reliability.

The leading cause of MOT failure for the 1999 Rover 211i is Brakes, responsible for 2.2% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs range from ยฃ150โ€“400. Lamps, Reflectors and Electrical Equipment is the second most common issue at 1.1%. Seat Belts and Supplementary Restraint Systems follows at 1.1%.

โš  Based on limited data (91 tests)

Top failures specific to 1999 models only. The overall 211i page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Brakes2.2%2
2Lamps, Reflectors And Electrical Equipment1.1%1
3Seat Belts And Supplementary Restraint Systems1.1%1
4Suspension1.1%1

Failures per 10,000 Miles

avg. 71,872 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Brakes0.31% per 10K miLamps & Electrical0.15% per 10K miSeat Belts0.15% per 10K miSuspension0.15% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Brakes0.312.2%2
Lamps & Electrical0.151.1%1
Seat Belts0.151.1%1
Suspension0.151.1%1

Mileage Statistics

71,872
Mean
79,856
Median
49,263
25th Percentile
92,873
75th Percentile
7.49% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 1999 Rover 211i has an MOT pass rate of 46.2% based on 91 tests โ€” significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 71,872 miles on the odometer. With a 53.8% failure rate, the 1999 211i is rated as "Very Poor" for MOT reliability.

If you own or are considering buying a 1999 Rover 211i, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). At 71,872 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Brakes โ€” 2.2% of failures

Brakes issues account for 2.2% of MOT failures on 1999 Rover 211i models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Lamps, Reflectors and Electrical Equipment โ€” 1.1% of failures

Lamps, Reflectors and Electrical Equipment issues account for 1.1% of MOT failures on 1999 Rover 211i models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Seat Belts and Supplementary Restraint Systems โ€” 1.1% of failures

Seat Belts and Supplementary Restraint Systems issues account for 1.1% of MOT failures on 1999 Rover 211i models. Seat belt failures include frayed or cut webbing, faulty retractors, buckles that don't latch properly, and missing or damaged anchorages. All fitted seat belts must be functional. Typical repair costs: ยฃ50โ€“200 per belt. Pre-MOT check: Pull each seat belt fully out and check for fraying, cuts, or fading. Ensure each belt retracts smoothly and the buckle clicks securely. Check the pre-tensioner warning light on the dashboard.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue