1998 Rover 216 Si MOT Pass Rate
Pass rate for 216 Si models manufactured in 1998, based on 260 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 216 Si cars tested in 1998. Want to see how cars built in 1998 hold up over time?
View 1998 Rover 216 Si vintage page → (48.8% current pass rate)1998 Rover 216 Si MOT Analysis
The 1998 Rover 216 Si has an MOT pass rate of 48.8% based on 260 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 79,169 miles on the odometer. With a 51.2% failure rate, the 1998 216 Si is rated as "Very Poor" for MOT reliability.
The leading cause of MOT failure for the 1998 Rover 216 Si is Exhaust, Fuel and Emissions, responsible for 0.4% of failures. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs range from £100–1,000+. Suspension is the second most common issue at 0.4%. Tyres follows at 0.4%.
Top failures specific to 1998 models only. The overall 216 Si page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Exhaust, Fuel And Emissions | 0.4% | 1 |
| 2 | Suspension | 0.4% | 1 |
| 3 | Tyres | 0.4% | 1 |
Failures per 10,000 Miles
avg. 79,169 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Emissions & Exhaust | 0.05 | 0.4% | 1 |
| Suspension | 0.05 | 0.4% | 1 |
| Tyres | 0.05 | 0.4% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1998 Rover 216 Si has an MOT pass rate of 48.8% based on 260 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 79,169 miles on the odometer. With a 51.2% failure rate, the 1998 216 Si is rated as "Very Poor" for MOT reliability.
If you own or are considering buying a 1998 Rover 216 Si, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to exhaust, fuel and emissions: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help. At 79,169 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Exhaust, Fuel and Emissions — 0.4% of failures
Exhaust, Fuel and Emissions issues account for 0.4% of MOT failures on 1998 Rover 216 Si models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Suspension — 0.4% of failures
Suspension issues account for 0.4% of MOT failures on 1998 Rover 216 Si models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Tyres — 0.4% of failures
Tyres issues account for 0.4% of MOT failures on 1998 Rover 216 Si models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.