1992 Rover 220 MOT Pass Rate
Pass rate for 220 models manufactured in 1992, based on 313 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 220 cars tested in 1992. Want to see how cars built in 1992 hold up over time?
View 1992 Rover 220 vintage page → (51.5% current pass rate)1992 Rover 220 MOT Analysis
The 1992 Rover 220 has an MOT pass rate of 51.1% based on 313 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 102,794 miles on the odometer. With a 48.9% failure rate, the 1992 220 is rated as "Poor" for MOT reliability.
The leading cause of MOT failure for the 1992 Rover 220 is Body, chassis, structure, responsible for 0.6% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+.
Top failures specific to 1992 models only. The overall 220 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 0.6% | 2 |
Failures per 10,000 Miles
avg. 102,794 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 0.06 | 0.6% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1992 Rover 220 has an MOT pass rate of 51.1% based on 313 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 102,794 miles on the odometer. With a 48.9% failure rate, the 1992 220 is rated as "Poor" for MOT reliability.
If you own or are considering buying a 1992 Rover 220, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With an average mileage of 102,794 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Body, chassis, structure — 0.6% of failures
Body, chassis, structure issues account for 0.6% of MOT failures on 1992 Rover 220 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.