Skip to main content
Pass Your MOT

1994 Rover 418 MOT Pass Rate

Pass rate for 418 models manufactured in 1994, based on 2,433 real MOT test results.

46.9%
Pass Rate
53.1%
Fail Rate
2,433
Total Tests
130,735
Avg Mileage

Data from official DVSA MOT testing records

This page shows all 418 cars tested in 1994. Want to see how cars built in 1994 hold up over time?

View 1994 Rover 418 vintage page โ†’ (56.3% current pass rate)

1994 Rover 418 MOT Analysis

The 1994 Rover 418 has an MOT pass rate of 46.9% based on 2,433 tests โ€” significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 130,735 miles on the odometer. With a 53.1% failure rate, the 1994 418 is rated as "Very Poor" for MOT reliability.

The leading cause of MOT failure for the 1994 Rover 418 is Suspension, responsible for 0.8% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from ยฃ200โ€“500. Tyres is the second most common issue at 0.3%. Brakes follows at 0.3%.

Top failures specific to 1994 models only. The overall 418 page may show different rankings.

What Fails Most

Suspension 0.8%
Tyres 0.3%
Brakes 0.3%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension0.8%20
2Tyres0.3%8
3Brakes0.3%8
4Lamps, Reflectors And Electrical Equipment0.2%6
5Body, Chassis, Structure0.2%4
6Noise, Emissions And Leaks0.1%2
7Steering0.1%2
8Visibility0.1%2

Failures per 10,000 Miles

avg. 130,735 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension0.06% per 10K miTyres0.03% per 10K miBrakes0.03% per 10K miLamps & Electrical0.02% per 10K miBody & Structure0.01% per 10K miNoise, emissions and leaks0.01% per 10K miSteering0.01% per 10K miVisibility0.01% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension0.060.8%20
Tyres0.030.3%8
Brakes0.030.3%8
Lamps & Electrical0.020.2%6
Body & Structure0.010.2%4
Noise, emissions and leaks0.010.1%2
Steering0.010.1%2
Visibility0.010.1%2

Mileage Statistics

130,735
Mean
125,885
Median
88,296
25th Percentile
162,577
75th Percentile
4.06% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 1994 Rover 418 has an MOT pass rate of 46.9% based on 2,433 tests โ€” significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 130,735 miles on the odometer. With a 53.1% failure rate, the 1994 418 is rated as "Very Poor" for MOT reliability.

If you own or are considering buying a 1994 Rover 418, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With an average mileage of 130,735 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Suspension โ€” 0.8% of failures

Suspension issues account for 0.8% of MOT failures on 1994 Rover 418 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Tyres โ€” 0.3% of failures

Tyres issues account for 0.3% of MOT failures on 1994 Rover 418 models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: ยฃ50โ€“200 per tyre. Pre-MOT check: Check tread depth with a 20p coin โ€” if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Brakes โ€” 0.3% of failures

Brakes issues account for 0.3% of MOT failures on 1994 Rover 418 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue