2003 Rover Cityrover MOT Pass Rate
Pass rate for Cityrover models manufactured in 2003, based on 2,512 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Cityrover cars tested in 2003. Want to see how cars built in 2003 hold up over time?
View 2003 Rover Cityrover vintage page → (31.3% current pass rate)2003 Rover Cityrover MOT Analysis
The 2003 Rover Cityrover has an MOT pass rate of 41.0% based on 2,512 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 38,276 miles on the odometer. With a 59.0% failure rate, the 2003 Cityrover is rated as "Very Poor" for MOT reliability.
The leading cause of MOT failure for the 2003 Rover Cityrover is Brakes, responsible for 0.2% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Suspension is the second most common issue at 0.2%. Body, chassis, structure follows at 0.2%.
Top failures specific to 2003 models only. The overall Cityrover page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Brakes | 0.2% | 6 |
| 2 | Suspension | 0.2% | 4 |
| 3 | Body, Chassis, Structure | 0.2% | 4 |
| 4 | Non-component Advisories | 0.1% | 3 |
| 5 | Noise, Emissions And Leaks | 0.1% | 2 |
| 6 | Visibility | 0.1% | 2 |
| 7 | Lamps, Reflectors And Electrical Equipment | 0.1% | 2 |
Failures per 10,000 Miles
avg. 38,276 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Brakes | 0.06 | 0.2% | 6 |
| Suspension | 0.04 | 0.2% | 4 |
| Body & Structure | 0.04 | 0.2% | 4 |
| Non-component advisories | 0.03 | 0.1% | 3 |
| Noise, emissions and leaks | 0.02 | 0.1% | 2 |
| Visibility | 0.02 | 0.1% | 2 |
| Lamps & Electrical | 0.02 | 0.1% | 2 |
| Identification of the vehicle | 0.01 | 0.0% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2003 Rover Cityrover has an MOT pass rate of 41.0% based on 2,512 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 38,276 miles on the odometer. With a 59.0% failure rate, the 2003 Cityrover is rated as "Very Poor" for MOT reliability.
If you own or are considering buying a 2003 Rover Cityrover, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With relatively low average mileage of 38,276 miles, many of these vehicles are still in good mechanical condition.
Brakes — 0.2% of failures
Brakes issues account for 0.2% of MOT failures on 2003 Rover Cityrover models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Suspension — 0.2% of failures
Suspension issues account for 0.2% of MOT failures on 2003 Rover Cityrover models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Body, chassis, structure — 0.2% of failures
Body, chassis, structure issues account for 0.2% of MOT failures on 2003 Rover Cityrover models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.