Skip to main content
Pass Your MOT

1992 Rover Metro Quest MOT Pass Rate

Pass rate for Metro Quest models manufactured in 1992, based on 36 real MOT test results.

30.6%
Pass Rate
69.4%
Fail Rate
36
Total Tests
54,135
Avg Mileage

Data from official DVSA MOT testing records

1992 Rover Metro Quest MOT Analysis

The 1992 Rover Metro Quest has an MOT pass rate of 30.6% based on 36 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 54,135 miles on the odometer. With a 69.4% failure rate, the 1992 Metro Quest is rated as "Very Poor" for MOT reliability.

The leading cause of MOT failure for the 1992 Rover Metro Quest is Exhaust, Fuel and Emissions, responsible for 11.1% of failures. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs range from £100–1,000+. Body, Structure and General Items is the second most common issue at 2.8%.

⚠ Based on limited data (36 tests)

Top failures specific to 1992 models only. The overall Metro Quest page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Exhaust, Fuel And Emissions11.1%4
2Body, Structure And General Items2.8%1

Failures per 10,000 Miles

avg. 54,135 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Emissions & Exhaust2.05% per 10K miBody & Structure0.51% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Emissions & Exhaust2.0511.1%4
Body & Structure0.512.8%1

Mileage Statistics

54,135
Mean
55,655
Median
46,689
25th Percentile
70,595
75th Percentile
12.82% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1992 Rover Metro Quest has an MOT pass rate of 30.6% based on 36 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 54,135 miles on the odometer. With a 69.4% failure rate, the 1992 Metro Quest is rated as "Very Poor" for MOT reliability.

If you own or are considering buying a 1992 Rover Metro Quest, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to exhaust, fuel and emissions: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help. At 54,135 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Exhaust, Fuel and Emissions — 11.1% of failures

Exhaust, Fuel and Emissions issues account for 11.1% of MOT failures on 1992 Rover Metro Quest models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.

Body, Structure and General Items — 2.8% of failures

Body, Structure and General Items issues account for 2.8% of MOT failures on 1992 Rover Metro Quest models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue