Skip to main content
Pass Your MOT

1976 Rover P6 MOT Pass Rate

Pass rate for P6 models manufactured in 1976, based on 47 real MOT test results.

72.3%
Pass Rate
27.7%
Fail Rate
47
Total Tests
59,955
Avg Mileage

Data from official DVSA MOT testing records

1976 Rover P6 MOT Analysis

The 1976 Rover P6 has an MOT pass rate of 72.3% based on 47 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 59,955 miles on the odometer. With a 27.7% failure rate, the 1976 P6 is rated as "Very Good" for MOT reliability.

The leading cause of MOT failure for the 1976 Rover P6 is Non-component advisories, responsible for 4.3% of failures. Non-component advisories issues are a common cause of MOT failure. Regular inspection and maintenance of these components helps ensure your vehicle passes its MOT. Typical repair costs range from £100–400. Suspension is the second most common issue at 4.3%. Brakes follows at 2.1%.

⚠ Based on limited data (47 tests)

Top failures specific to 1976 models only. The overall P6 page may show different rankings.

What Fails Most

Non-component advisories 4.3%
Suspension 4.3%
Brakes 2.1%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Non-component Advisories4.3%2
2Suspension4.3%2
3Brakes2.1%1
4Lamps, Reflectors And Electrical Equipment2.1%1

Failures per 10,000 Miles

avg. 59,955 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Non-component advisories0.71% per 10K miSuspension0.71% per 10K miBrakes0.35% per 10K miLamps & Electrical0.35% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Non-component advisories0.714.3%2
Suspension0.714.3%2
Brakes0.352.1%1
Lamps & Electrical0.352.1%1

Mileage Statistics

59,955
Mean
56,056
Median
50,781
25th Percentile
76,660
75th Percentile
4.62% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1976 Rover P6 has an MOT pass rate of 72.3% based on 47 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 59,955 miles on the odometer. With a 27.7% failure rate, the 1976 P6 is rated as "Very Good" for MOT reliability.

If you own or are considering buying a 1976 Rover P6, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to non-component advisories: Have this system checked during regular servicing. Look for warning signs like unusual noises, vibrations, or dashboard warning lights. At 59,955 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Non-component advisories — 4.3% of failures

Non-component advisories issues account for 4.3% of MOT failures on 1976 Rover P6 models. Non-component advisories issues are a common cause of MOT failure. Regular inspection and maintenance of these components helps ensure your vehicle passes its MOT. Typical repair costs: £100–400. Pre-MOT check: Have this system checked during regular servicing. Look for warning signs like unusual noises, vibrations, or dashboard warning lights.

Suspension — 4.3% of failures

Suspension issues account for 4.3% of MOT failures on 1976 Rover P6 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Brakes — 2.1% of failures

Brakes issues account for 2.1% of MOT failures on 1976 Rover P6 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue