2005 Royal Enfield Bullet 500 MOT Pass Rate
Pass rate for Bullet 500 models manufactured in 2005, based on 2,246 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Bullet 500 cars tested in 2005. Want to see how cars built in 2005 hold up over time?
View 2005 Royal Enfield Bullet 500 vintage page → (85.2% current pass rate)2005 Royal Enfield Bullet 500 MOT Analysis
The 2005 Royal Enfield Bullet 500 has an MOT pass rate of 89.4% based on 2,246 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 9,456 miles on the odometer. With a 10.6% failure rate, the 2005 Bullet 500 is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2005 Royal Enfield Bullet 500 is Motorcycle lamps and reflectors, responsible for 0.3% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Motorcycle brakes is the second most common issue at 0.1%. Identification of the vehicle follows at 0.0%.
Top failures specific to 2005 models only. The overall Bullet 500 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Motorcycle Lamps And Reflectors | 0.3% | 6 |
| 2 | Motorcycle Brakes | 0.1% | 3 |
Failures per 10,000 Miles
avg. 9,456 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Motorcycle lamps and reflectors | 0.28 | 0.3% | 6 |
| Motorcycle brakes | 0.14 | 0.1% | 3 |
| Identification of the vehicle | 0.05 | 0.0% | 1 |
| Motorcycle suspension | 0.05 | 0.0% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2005 Royal Enfield Bullet 500 has an MOT pass rate of 89.4% based on 2,246 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 9,456 miles on the odometer. With a 10.6% failure rate, the 2005 Bullet 500 is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2005 Royal Enfield Bullet 500, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to motorcycle lamps and reflectors: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 9,456 miles, many of these vehicles are still in good mechanical condition.
Motorcycle lamps and reflectors — 0.3% of failures
Motorcycle lamps and reflectors issues account for 0.3% of MOT failures on 2005 Royal Enfield Bullet 500 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Motorcycle brakes — 0.1% of failures
Motorcycle brakes issues account for 0.1% of MOT failures on 2005 Royal Enfield Bullet 500 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Identification of the vehicle — 0.0% of failures
Identification of the vehicle issues account for 0.0% of MOT failures on 2005 Royal Enfield Bullet 500 models. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs: £10–50. Pre-MOT check: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.