Skip to main content
Pass Your MOT

1992 Saab 9000 Cs MOT Pass Rate

Pass rate for 9000 Cs models manufactured in 1992, based on 1,386 real MOT test results.

41.3%
Pass Rate
58.7%
Fail Rate
1,386
Total Tests
136,541
Avg Mileage

Data from official DVSA MOT testing records

This page shows all 9000 Cs cars tested in 1992. Want to see how cars built in 1992 hold up over time?

View 1992 Saab 9000 Cs vintage page โ†’ (47.1% current pass rate)

1992 Saab 9000 Cs MOT Analysis

The 1992 Saab 9000 Cs has an MOT pass rate of 41.3% based on 1,386 tests โ€” significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 136,541 miles on the odometer. With a 58.7% failure rate, the 1992 9000 Cs is rated as "Very Poor" for MOT reliability.

The leading cause of MOT failure for the 1992 Saab 9000 Cs is Suspension, responsible for 0.6% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from ยฃ200โ€“500. Body, chassis, structure is the second most common issue at 0.4%. Brakes follows at 0.3%.

Top failures specific to 1992 models only. The overall 9000 Cs page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension0.6%8
2Body, Chassis, Structure0.4%6
3Brakes0.3%4
4Noise, Emissions And Leaks0.3%4
5Identification Of The Vehicle0.1%2
6Lamps, Reflectors And Electrical Equipment0.1%2
7Visibility0.1%2

Failures per 10,000 Miles

avg. 136,541 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension0.04% per 10K miBody & Structure0.03% per 10K miBrakes0.02% per 10K miNoise, emissions and leaks0.02% per 10K miIdentification of the vehicle0.01% per 10K miLamps & Electrical0.01% per 10K miVisibility0.01% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension0.040.6%8
Body & Structure0.030.4%6
Brakes0.020.3%4
Noise, emissions and leaks0.020.3%4
Identification of the vehicle0.010.1%2
Lamps & Electrical0.010.1%2
Visibility0.010.1%2

Mileage Statistics

136,541
Mean
132,179
Median
116,181
25th Percentile
163,892
75th Percentile
4.30% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 1992 Saab 9000 Cs has an MOT pass rate of 41.3% based on 1,386 tests โ€” significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 136,541 miles on the odometer. With a 58.7% failure rate, the 1992 9000 Cs is rated as "Very Poor" for MOT reliability.

If you own or are considering buying a 1992 Saab 9000 Cs, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With an average mileage of 136,541 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Suspension โ€” 0.6% of failures

Suspension issues account for 0.6% of MOT failures on 1992 Saab 9000 Cs models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Body, chassis, structure โ€” 0.4% of failures

Body, chassis, structure issues account for 0.4% of MOT failures on 1992 Saab 9000 Cs models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: ยฃ100โ€“500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.

Brakes โ€” 0.3% of failures

Brakes issues account for 0.3% of MOT failures on 1992 Saab 9000 Cs models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue