2013 SEAT Toledo Se Tdi Cr MOT Pass Rate
Pass rate for Toledo Se Tdi Cr models manufactured in 2013, based on 31 real MOT test results.
Data from official DVSA MOT testing records
2013 SEAT Toledo Se Tdi Cr MOT Analysis
The 2013 SEAT Toledo Se Tdi Cr has an MOT pass rate of 80.6% based on 31 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 56,051 miles on the odometer. With a 19.4% failure rate, the 2013 Toledo Se Tdi Cr is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2013 SEAT Toledo Se Tdi Cr is Lamps, Reflectors and Electrical Equipment, responsible for 12.9% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Tyres is the second most common issue at 9.7%. Steering follows at 6.5%.
Top failures specific to 2013 models only. The overall Toledo Se Tdi Cr page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Lamps, Reflectors And Electrical Equipment | 12.9% | 4 |
| 2 | Tyres | 9.7% | 3 |
| 3 | Steering | 6.5% | 2 |
| 4 | Brakes | 6.5% | 2 |
| 5 | Driver's View Of The Road | 6.5% | 2 |
| 6 | Suspension | 3.2% | 1 |
| 7 | Seat Belts And Supplementary Restraint Systems | 3.2% | 1 |
Failures per 10,000 Miles
avg. 56,051 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Lamps & Electrical | 2.30 | 12.9% | 4 |
| Tyres | 1.73 | 9.7% | 3 |
| Steering | 1.15 | 6.5% | 2 |
| Brakes | 1.15 | 6.5% | 2 |
| Visibility | 1.15 | 6.5% | 2 |
| Suspension | 0.58 | 3.2% | 1 |
| Seat Belts | 0.58 | 3.2% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2013 SEAT Toledo Se Tdi Cr has an MOT pass rate of 80.6% based on 31 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 56,051 miles on the odometer. With a 19.4% failure rate, the 2013 Toledo Se Tdi Cr is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2013 SEAT Toledo Se Tdi Cr, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. At 56,051 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Lamps, Reflectors and Electrical Equipment — 12.9% of failures
Lamps, Reflectors and Electrical Equipment issues account for 12.9% of MOT failures on 2013 SEAT Toledo Se Tdi Cr models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Tyres — 9.7% of failures
Tyres issues account for 9.7% of MOT failures on 2013 SEAT Toledo Se Tdi Cr models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Steering — 6.5% of failures
Steering issues account for 6.5% of MOT failures on 2013 SEAT Toledo Se Tdi Cr models. Steering failures include excessive play in the steering wheel, leaking power steering fluid, worn track rod ends, and damaged steering rack. These affect vehicle control and are closely related to suspension wear. Typical repair costs: £150–600. Pre-MOT check: Check for excessive steering wheel play (more than a few inches of free movement). Listen for whining from the power steering pump. Look for fluid leaks under the car near the front wheels.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.