Skip to main content
Pass Your MOT

2019 Sinnis Classic MOT Pass Rate

Pass rate for Classic models manufactured in 2019, based on 40 real MOT test results.

57.5%
Pass Rate
42.5%
Fail Rate
40
Total Tests
6,492
Avg Mileage

Data from official DVSA MOT testing records

2019 Sinnis Classic MOT Analysis

The 2019 Sinnis Classic has an MOT pass rate of 57.5% based on 40 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 6,492 miles on the odometer. With a 42.5% failure rate, the 2019 Classic is rated as "Below Average" for MOT reliability.

The leading cause of MOT failure for the 2019 Sinnis Classic is Motorcycle lamps and reflectors, responsible for 10.0% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Motorcycle brakes is the second most common issue at 7.5%. Motorcycle structure and attachments follows at 5.0%.

⚠ Based on limited data (40 tests)

Top failures specific to 2019 models only. The overall Classic page may show different rankings.

What Fails Most

Motorcycle lamps and reflectors 10.0%
Motorcycle brakes 7.5%
Motorcycle structure and attachments 5.0%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Motorcycle Lamps And Reflectors10.0%4
2Motorcycle Brakes7.5%3
3Motorcycle Structure And Attachments5.0%2
4Motorcycle Tyres2.5%1
5Non-component Advisories2.5%1

Failures per 10,000 Miles

avg. 6,492 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Motorcycle lamps and reflectors15.40% per 10K miMotorcycle brakes11.55% per 10K miMotorcycle structure and attachments7.70% per 10K miMotorcycle tyres3.85% per 10K miNon-component advisories3.85% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Motorcycle lamps and reflectors15.4010.0%4
Motorcycle brakes11.557.5%3
Motorcycle structure and attachments7.705.0%2
Motorcycle tyres3.852.5%1
Non-component advisories3.852.5%1

Mileage Statistics

6,492
Mean
5,935
Median
2,095
25th Percentile
8,739
75th Percentile
65.47% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 2019 Sinnis Classic has an MOT pass rate of 57.5% based on 40 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 6,492 miles on the odometer. With a 42.5% failure rate, the 2019 Classic is rated as "Below Average" for MOT reliability.

If you own or are considering buying a 2019 Sinnis Classic, budget for potential repairs before each MOT. Before your MOT, pay particular attention to motorcycle lamps and reflectors: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 6,492 miles, many of these vehicles are still in good mechanical condition.

Motorcycle lamps and reflectors — 10.0% of failures

Motorcycle lamps and reflectors issues account for 10.0% of MOT failures on 2019 Sinnis Classic models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Motorcycle brakes — 7.5% of failures

Motorcycle brakes issues account for 7.5% of MOT failures on 2019 Sinnis Classic models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Motorcycle structure and attachments — 5.0% of failures

Motorcycle structure and attachments issues account for 5.0% of MOT failures on 2019 Sinnis Classic models. Motorcycle structure and attachments issues are a common cause of MOT failure. Regular inspection and maintenance of these components helps ensure your vehicle passes its MOT. Typical repair costs: £100–400. Pre-MOT check: Have this system checked during regular servicing. Look for warning signs like unusual noises, vibrations, or dashboard warning lights.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue