Skip to main content
Pass Your MOT

2009 Smart (mcc) Roadster MOT Pass Rate

Pass rate for Roadster models manufactured in 2009, based on 32 real MOT test results.

59.4%
Pass Rate
40.6%
Fail Rate
32
Total Tests
45,658
Avg Mileage

Data from official DVSA MOT testing records

2009 Smart (mcc) Roadster MOT Analysis

The 2009 Smart (mcc) Roadster has an MOT pass rate of 59.4% based on 32 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 45,658 miles on the odometer. With a 40.6% failure rate, the 2009 Roadster is rated as "Below Average" for MOT reliability.

The leading cause of MOT failure for the 2009 Smart (mcc) Roadster is Lamps, reflectors and electrical equipment, responsible for 9.4% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Brakes is the second most common issue at 6.3%.

⚠ Based on limited data (32 tests)

Top failures specific to 2009 models only. The overall Roadster page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Lamps, Reflectors And Electrical Equipment9.4%3
2Brakes6.3%2

Failures per 10,000 Miles

avg. 45,658 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Lamps & Electrical2.05% per 10K miBrakes1.37% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Lamps & Electrical2.059.4%3
Brakes1.376.3%2

Mileage Statistics

45,658
Mean
53,129
Median
44,841
25th Percentile
61,124
75th Percentile
8.89% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 2009 Smart (mcc) Roadster has an MOT pass rate of 59.4% based on 32 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 45,658 miles on the odometer. With a 40.6% failure rate, the 2009 Roadster is rated as "Below Average" for MOT reliability.

If you own or are considering buying a 2009 Smart (mcc) Roadster, budget for potential repairs before each MOT. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 45,658 miles, many of these vehicles are still in good mechanical condition.

Lamps, reflectors and electrical equipment — 9.4% of failures

Lamps, reflectors and electrical equipment issues account for 9.4% of MOT failures on 2009 Smart (mcc) Roadster models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Brakes — 6.3% of failures

Brakes issues account for 6.3% of MOT failures on 2009 Smart (mcc) Roadster models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue