Subaru Justy MOT Pass Rate
Overall pass rate across all manufacture years, based on 21,635 real MOT test results. Failure rate: 39.2%.
Data from official DVSA MOT testing records
Subaru Justy MOT Reliability Overview
The Subaru Justy is a relatively common sight on UK roads, with 21,635 MOT test results recorded in our database spanning 19 manufacture years. It has an overall MOT pass rate of 60.8% and a failure rate of 39.2%, which is around the UK average of approximately 37%.
Based on this data, the Subaru Justy earns a "Average" reliability rating. The average Subaru Justy presents for MOT with approximately 53,214 miles on the clock. Manufacture year matters: 2008 models achieve the highest pass rate at 75.4%, while 1988 models have the lowest at 41.8%. This 33.6 percentage point difference suggests notable variation in build quality or component durability across production years.
The most common MOT failure for the Subaru Justy is Suspension, affecting 35.0% of all tests. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. The second most common issue is Brakes at 26.8%. Tyres rounds out the top three at 19.2%. Together, these top 3 failure categories account for a significant portion of all MOT failures for this model.
Top failures across all manufacture years combined. Individual year pages may show different top failures.
What Fails Most
Best Year to Buy
📈 How Each Vintage Ages
Tracking how each manufacture year's MOT pass rate changes as the car ages. Showing 8 vintages — click year chips to highlight.
Multi-line chart showing how different Subaru Justy vintages degrade over time, from age 3 to 20 years.
Only vintages with 100+ tests in at least 3 different test years are shown. Fleet average is the UK-wide pass rate for all cars at each age.
📉 How Age Affects Reliability
MOT failure rate by vehicle age for the Subaru Justy. The dashed red line marks when the manufacturer warranty typically expires (3 years).
Line chart showing MOT failure rate by vehicle age from 3 to 20 years, with warranty expiry marked at 3 years.
💡 What does the warranty cliff mean?
The Subaru Justy ages relatively gracefully. The failure rate increase of 8% after warranty is below average, suggesting good long-term reliability. Peak failure occurs at age 17 (54.3% fail rate).
Note: pass rates may improve for very old vehicles due to survivorship bias — only well-maintained cars remain on the road.
Pass Rate by Manufacture Year
* High Fail Rate badge indicates an MOT pass rate below 65% (failure rate above 35%).
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 49.8% | 10,775 |
| 2 | Brakes | 36.4% | 7,876 |
| 3 | Lamps, Reflectors And Electrical Equipment | 24.0% | 5,177 |
| 4 | Tyres | 23.6% | 5,110 |
| 5 | Exhaust, Fuel And Emissions | 15.8% | 3,422 |
| 6 | Driver's View Of The Road | 10.1% | 2,188 |
| 7 | Seat Belts And Supplementary Restraint Systems | 7.8% | 1,698 |
| 8 | Body, Structure And General Items | 7.5% | 1,633 |
| 9 | Body, Chassis, Structure | 3.6% | 776 |
| 10 | Steering | 2.5% | 542 |
| 11 | Visibility | 2.4% | 514 |
| 12 | Noise, Emissions And Leaks | 2.1% | 452 |
| 13 | Registration Plates And Vin | 2.0% | 423 |
| 14 | Non-component Advisories | 1.7% | 357 |
Failures per 10,000 Miles
avg. 53,214 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 9.36 | 49.8% | 10,775 |
| Brakes | 6.84 | 36.4% | 7,876 |
| Lamps & Electrical | 4.49 | 24.0% | 5,177 |
| Tyres | 4.44 | 23.6% | 5,110 |
| Emissions & Exhaust | 2.97 | 15.8% | 3,422 |
| Visibility | 2.35 | 12.5% | 2,702 |
| Body & Structure | 2.09 | 11.1% | 2,409 |
| Seat Belts | 1.47 | 7.8% | 1,698 |
| Steering | 0.47 | 2.5% | 542 |
| Noise, emissions and leaks | 0.39 | 2.1% | 452 |
| Registration Plates and VIN | 0.37 | 2.0% | 423 |
| Non-component advisories | 0.31 | 1.7% | 357 |
🚗 Similar Cars to Consider
Mileage at MOT
The average Subaru Justy has 53,214 miles when tested for MOT.
📊 Mileage-Adjusted Failure Rate
How often this car fails MOT relative to how much it's driven — a fairer comparison than raw pass rate.
The Subaru Justy has a mileage-adjusted failure rate of 7.37% per 10,000 miles driven. The average across all makes is 5.38%, so this model is worse than average.
About Subaru Justy MOT Data
The Subaru Justy is a relatively common sight on UK roads, with 21,635 MOT test results recorded in our database spanning 19 manufacture years. It has an overall MOT pass rate of 60.8% and a failure rate of 39.2%, which is around the UK average of approximately 37%.
For Subaru Justy owners, these results suggest average reliability — some preparation before MOT can improve pass chances. Focus your pre-MOT checks on suspension and brakes for the best chance of a first-time pass. Use our detailed year-by-year breakdown and failure analysis below to understand how your specific Justy is likely to perform.
Suspension — 35.0% of failures
Suspension issues account for 35.0% of MOT failures on the Subaru Justy. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Brakes — 26.8% of failures
Brakes issues account for 26.8% of MOT failures on the Subaru Justy. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Tyres — 19.2% of failures
Tyres issues account for 19.2% of MOT failures on the Subaru Justy. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Frequently Asked Questions
What is the MOT pass rate for the Subaru Justy?
Based on 21,635 MOT tests in our database, the Subaru Justy has an overall pass rate of 60.8% (39.2% fail rate).
What are the most common MOT failures on a Subaru Justy?
The top 3 reasons a Subaru Justy fails its MOT are: 1. Suspension (35.0%), 2. Brakes (26.8%), 3. Tyres (19.2%). Check these areas before booking your MOT.
Is the Subaru Justy reliable?
With a 39.2% MOT failure rate, the Justy is about average compared to the UK average of ~40%.
What should I check before an MOT on my Subaru Justy?
Based on failure data, focus on: Suspension (35.0%); Brakes (26.8%); Tyres (19.2%). These are the areas most likely to cause a fail. Also check all lights, tyres (minimum 1.6mm tread), and windscreen condition — these are quick wins that apply to all cars.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.