1996 Subaru Sambar MOT Pass Rate
Pass rate for Sambar models manufactured in 1996, based on 48 real MOT test results.
Data from official DVSA MOT testing records
1996 Subaru Sambar MOT Analysis
The 1996 Subaru Sambar has an MOT pass rate of 58.3% based on 48 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 76,827 miles on the odometer. With a 41.7% failure rate, the 1996 Sambar is rated as "Below Average" for MOT reliability.
The leading cause of MOT failure for the 1996 Subaru Sambar is Body, chassis, structure, responsible for 2.1% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Noise, emissions and leaks is the second most common issue at 2.1%.
Top failures specific to 1996 models only. The overall Sambar page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 2.1% | 1 |
| 2 | Noise, Emissions And Leaks | 2.1% | 1 |
Failures per 10,000 Miles
avg. 76,827 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 0.27 | 2.1% | 1 |
| Noise, emissions and leaks | 0.27 | 2.1% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1996 Subaru Sambar has an MOT pass rate of 58.3% based on 48 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 76,827 miles on the odometer. With a 41.7% failure rate, the 1996 Sambar is rated as "Below Average" for MOT reliability.
If you own or are considering buying a 1996 Subaru Sambar, budget for potential repairs before each MOT. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. At 76,827 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Body, chassis, structure — 2.1% of failures
Body, chassis, structure issues account for 2.1% of MOT failures on 1996 Subaru Sambar models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Noise, emissions and leaks — 2.1% of failures
Noise, emissions and leaks issues account for 2.1% of MOT failures on 1996 Subaru Sambar models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.