Skip to main content
Pass Your MOT

1971 Sunbeam Stiletto MOT Pass Rate

Pass rate for Stiletto models manufactured in 1971, based on 66 real MOT test results.

83.3%
Pass Rate
16.7%
Fail Rate
66
Total Tests
48,873
Avg Mileage

Data from official DVSA MOT testing records

1971 Sunbeam Stiletto MOT Analysis

The 1971 Sunbeam Stiletto has an MOT pass rate of 83.3% based on 66 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 48,873 miles on the odometer. With a 16.7% failure rate, the 1971 Stiletto is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 1971 Sunbeam Stiletto is Lamps, reflectors and electrical equipment, responsible for 3.0% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Brakes is the second most common issue at 1.5%.

⚠ Based on limited data (66 tests)

Top failures specific to 1971 models only. The overall Stiletto page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Lamps, Reflectors And Electrical Equipment3.0%2
2Brakes1.5%1

Failures per 10,000 Miles

avg. 48,873 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Lamps & Electrical0.62% per 10K miBrakes0.31% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Lamps & Electrical0.623.0%2
Brakes0.311.5%1

Mileage Statistics

48,873
Mean
63,688
Median
50,145
25th Percentile
67,015
75th Percentile
3.42% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1971 Sunbeam Stiletto has an MOT pass rate of 83.3% based on 66 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 48,873 miles on the odometer. With a 16.7% failure rate, the 1971 Stiletto is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 1971 Sunbeam Stiletto, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 48,873 miles, many of these vehicles are still in good mechanical condition.

Lamps, reflectors and electrical equipment — 3.0% of failures

Lamps, reflectors and electrical equipment issues account for 3.0% of MOT failures on 1971 Sunbeam Stiletto models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Brakes — 1.5% of failures

Brakes issues account for 1.5% of MOT failures on 1971 Sunbeam Stiletto models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue