Skip to main content
Pass Your MOT

1995 Talbot Express 1300 MOT Pass Rate

Pass rate for Express 1300 models manufactured in 1995, based on 93 real MOT test results.

63.4%
Pass Rate
36.6%
Fail Rate
93
Total Tests
69,961
Avg Mileage

Data from official DVSA MOT testing records

1995 Talbot Express 1300 MOT Analysis

The 1995 Talbot Express 1300 has an MOT pass rate of 63.4% based on 93 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 69,961 miles on the odometer. With a 36.6% failure rate, the 1995 Express 1300 is rated as "Average" for MOT reliability.

The leading cause of MOT failure for the 1995 Talbot Express 1300 is Body, chassis, structure, responsible for 10.8% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Brakes is the second most common issue at 6.5%. Suspension follows at 4.3%.

⚠ Based on limited data (93 tests)

Top failures specific to 1995 models only. The overall Express 1300 page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Body, Chassis, Structure10.8%10
2Brakes6.5%6
3Suspension4.3%4
4Identification Of The Vehicle2.2%2
5Lamps, Reflectors And Electrical Equipment2.2%2
6Noise, Emissions And Leaks2.2%2

Failures per 10,000 Miles

avg. 69,961 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Body & Structure1.54% per 10K miBrakes0.92% per 10K miSuspension0.61% per 10K miIdentification of the vehicle0.31% per 10K miLamps & Electrical0.31% per 10K miNoise, emissions and leaks0.31% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Body & Structure1.5410.8%10
Brakes0.926.5%6
Suspension0.614.3%4
Identification of the vehicle0.312.2%2
Lamps & Electrical0.312.2%2
Noise, emissions and leaks0.312.2%2

Mileage Statistics

69,961
Mean
71,452
Median
49,907
25th Percentile
80,926
75th Percentile
5.23% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1995 Talbot Express 1300 has an MOT pass rate of 63.4% based on 93 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 69,961 miles on the odometer. With a 36.6% failure rate, the 1995 Express 1300 is rated as "Average" for MOT reliability.

If you own or are considering buying a 1995 Talbot Express 1300, budget for potential repairs before each MOT. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. At 69,961 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Body, chassis, structure — 10.8% of failures

Body, chassis, structure issues account for 10.8% of MOT failures on 1995 Talbot Express 1300 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.

Brakes — 6.5% of failures

Brakes issues account for 6.5% of MOT failures on 1995 Talbot Express 1300 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Suspension — 4.3% of failures

Suspension issues account for 4.3% of MOT failures on 1995 Talbot Express 1300 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue