Skip to main content
Pass Your MOT

1992 Toyota 4-runner MOT Pass Rate

Pass rate for 4-runner models manufactured in 1992, based on 211 real MOT test results.

58.3%
Pass Rate
41.7%
Fail Rate
211
Total Tests
152,653
Avg Mileage

Data from official DVSA MOT testing records

This page shows all 4-runner cars tested in 1992. Want to see how cars built in 1992 hold up over time?

View 1992 Toyota 4-runner vintage page โ†’ (53.3% current pass rate)

1992 Toyota 4-runner MOT Analysis

The 1992 Toyota 4-runner has an MOT pass rate of 58.3% based on 211 tests โ€” slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 152,653 miles on the odometer. With a 41.7% failure rate, the 1992 4-runner is rated as "Below Average" for MOT reliability.

The leading cause of MOT failure for the 1992 Toyota 4-runner is Brakes, responsible for 1.4% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs range from ยฃ150โ€“400. Lamps, reflectors and electrical equipment is the second most common issue at 1.4%. Suspension follows at 0.9%.

Top failures specific to 1992 models only. The overall 4-runner page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Brakes1.4%3
2Lamps, Reflectors And Electrical Equipment1.4%3
3Suspension0.9%2
4Body, Chassis, Structure0.5%1

Failures per 10,000 Miles

avg. 152,653 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Brakes0.09% per 10K miLamps & Electrical0.09% per 10K miSuspension0.06% per 10K miBody & Structure0.03% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Brakes0.091.4%3
Lamps & Electrical0.091.4%3
Suspension0.060.9%2
Body & Structure0.030.5%1

Mileage Statistics

152,653
Mean
151,313
Median
123,277
25th Percentile
182,700
75th Percentile
2.73% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 1992 Toyota 4-runner has an MOT pass rate of 58.3% based on 211 tests โ€” slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 152,653 miles on the odometer. With a 41.7% failure rate, the 1992 4-runner is rated as "Below Average" for MOT reliability.

If you own or are considering buying a 1992 Toyota 4-runner, budget for potential repairs before each MOT. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With an average mileage of 152,653 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Brakes โ€” 1.4% of failures

Brakes issues account for 1.4% of MOT failures on 1992 Toyota 4-runner models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Lamps, reflectors and electrical equipment โ€” 1.4% of failures

Lamps, reflectors and electrical equipment issues account for 1.4% of MOT failures on 1992 Toyota 4-runner models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Suspension โ€” 0.9% of failures

Suspension issues account for 0.9% of MOT failures on 1992 Toyota 4-runner models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue