Skip to main content
Pass Your MOT

2010 Toyota Aygo+ Vvt-i MOT Pass Rate

Pass rate for Aygo+ Vvt-i models manufactured in 2010, based on 61 real MOT test results.

77.0%
Pass Rate
23.0%
Fail Rate
61
Total Tests
36,149
Avg Mileage

Data from official DVSA MOT testing records

2010 Toyota Aygo+ Vvt-i MOT Analysis

The 2010 Toyota Aygo+ Vvt-i has an MOT pass rate of 77.0% based on 61 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 36,149 miles on the odometer. With a 23.0% failure rate, the 2010 Aygo+ Vvt-i is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 2010 Toyota Aygo+ Vvt-i is Brakes, responsible for 1.6% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Registration Plates and VIN is the second most common issue at 1.6%. Tyres follows at 1.6%.

⚠ Based on limited data (61 tests)

Top failures specific to 2010 models only. The overall Aygo+ Vvt-i page may show different rankings.

What Fails Most

Brakes 1.6%
Registration Plates and VIN 1.6%
Tyres 1.6%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Brakes1.6%1
2Registration Plates And Vin1.6%1
3Tyres1.6%1

Failures per 10,000 Miles

avg. 36,149 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Brakes0.45% per 10K miRegistration Plates and VIN0.45% per 10K miTyres0.45% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Brakes0.451.6%1
Registration Plates and VIN0.451.6%1
Tyres0.451.6%1

Mileage Statistics

36,149
Mean
36,242
Median
30,066
25th Percentile
50,788
75th Percentile
6.36% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 2010 Toyota Aygo+ Vvt-i has an MOT pass rate of 77.0% based on 61 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 36,149 miles on the odometer. With a 23.0% failure rate, the 2010 Aygo+ Vvt-i is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 2010 Toyota Aygo+ Vvt-i, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With relatively low average mileage of 36,149 miles, many of these vehicles are still in good mechanical condition.

Brakes — 1.6% of failures

Brakes issues account for 1.6% of MOT failures on 2010 Toyota Aygo+ Vvt-i models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Registration Plates and VIN — 1.6% of failures

Registration Plates and VIN issues account for 1.6% of MOT failures on 2010 Toyota Aygo+ Vvt-i models. Registration Plates and VIN issues are a common cause of MOT failure. Regular inspection and maintenance of these components helps ensure your vehicle passes its MOT. Typical repair costs: £100–400. Pre-MOT check: Have this system checked during regular servicing. Look for warning signs like unusual noises, vibrations, or dashboard warning lights.

Tyres — 1.6% of failures

Tyres issues account for 1.6% of MOT failures on 2010 Toyota Aygo+ Vvt-i models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue