2006 Toyota Dyna MOT Pass Rate
Pass rate for Dyna models manufactured in 2006, based on 3,868 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Dyna cars tested in 2006. Want to see how cars built in 2006 hold up over time?
View 2006 Toyota Dyna vintage page → (54.4% current pass rate)2006 Toyota Dyna MOT Analysis
The 2006 Toyota Dyna has an MOT pass rate of 55.7% based on 3,868 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 89,474 miles on the odometer. With a 44.3% failure rate, the 2006 Dyna is rated as "Below Average" for MOT reliability.
The leading cause of MOT failure for the 2006 Toyota Dyna is Suspension, responsible for 3.6% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Lamps, reflectors and electrical equipment is the second most common issue at 3.1%. Brakes follows at 2.5%.
Top failures specific to 2006 models only. The overall Dyna page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 3.6% | 140 |
| 2 | Lamps, Reflectors And Electrical Equipment | 3.1% | 120 |
| 3 | Brakes | 2.5% | 97 |
| 4 | Tyres | 2.0% | 78 |
| 5 | Body, Chassis, Structure | 1.5% | 59 |
| 6 | Visibility | 1.3% | 49 |
| 7 | Seat Belts And Supplementary Restraint Systems | 0.7% | 27 |
| 8 | Steering | 0.6% | 24 |
| 9 | Noise, Emissions And Leaks | 0.5% | 21 |
| 10 | Identification Of The Vehicle | 0.4% | 17 |
| 11 | Non-component Advisories | 0.1% | 5 |
Failures per 10,000 Miles
avg. 89,474 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 0.40 | 3.6% | 140 |
| Lamps & Electrical | 0.35 | 3.1% | 120 |
| Brakes | 0.28 | 2.5% | 97 |
| Tyres | 0.23 | 2.0% | 78 |
| Body & Structure | 0.17 | 1.5% | 59 |
| Visibility | 0.14 | 1.3% | 49 |
| Seat Belts | 0.08 | 0.7% | 27 |
| Steering | 0.07 | 0.6% | 24 |
| Noise, emissions and leaks | 0.06 | 0.5% | 21 |
| Identification of the vehicle | 0.05 | 0.4% | 17 |
| Non-component advisories | 0.01 | 0.1% | 5 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2006 Toyota Dyna has an MOT pass rate of 55.7% based on 3,868 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 89,474 miles on the odometer. With a 44.3% failure rate, the 2006 Dyna is rated as "Below Average" for MOT reliability.
If you own or are considering buying a 2006 Toyota Dyna, budget for potential repairs before each MOT. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With an average mileage of 89,474 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Suspension — 3.6% of failures
Suspension issues account for 3.6% of MOT failures on 2006 Toyota Dyna models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Lamps, reflectors and electrical equipment — 3.1% of failures
Lamps, reflectors and electrical equipment issues account for 3.1% of MOT failures on 2006 Toyota Dyna models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Brakes — 2.5% of failures
Brakes issues account for 2.5% of MOT failures on 2006 Toyota Dyna models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.