1996 Toyota Estima MOT Pass Rate
Pass rate for Estima models manufactured in 1996, based on 4,427 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Estima cars tested in 1996. Want to see how cars built in 1996 hold up over time?
View 1996 Toyota Estima vintage page → (55.4% current pass rate)1996 Toyota Estima MOT Analysis
The 1996 Toyota Estima has an MOT pass rate of 52.0% based on 4,427 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 143,767 miles on the odometer. With a 48.0% failure rate, the 1996 Estima is rated as "Poor" for MOT reliability.
The leading cause of MOT failure for the 1996 Toyota Estima is Noise, emissions and leaks, responsible for 0.1% of failures. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs range from £100–1,000+. Body, chassis, structure is the second most common issue at 0.0%. Brakes follows at 0.0%.
Top failures specific to 1996 models only. The overall Estima page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Noise, Emissions And Leaks | 0.1% | 3 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1996 Toyota Estima has an MOT pass rate of 52.0% based on 4,427 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 143,767 miles on the odometer. With a 48.0% failure rate, the 1996 Estima is rated as "Poor" for MOT reliability.
If you own or are considering buying a 1996 Toyota Estima, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to noise, emissions and leaks: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help. With an average mileage of 143,767 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Noise, emissions and leaks — 0.1% of failures
Noise, emissions and leaks issues account for 0.1% of MOT failures on 1996 Toyota Estima models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: £100–1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.
Body, chassis, structure — 0.0% of failures
Body, chassis, structure issues account for 0.0% of MOT failures on 1996 Toyota Estima models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Brakes — 0.0% of failures
Brakes issues account for 0.0% of MOT failures on 1996 Toyota Estima models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.