Skip to main content
Pass Your MOT

1961 Triumph Herald 1200 MOT Pass Rate

Pass rate for Herald 1200 models manufactured in 1961, based on 194 real MOT test results.

67.0%
Pass Rate
33.0%
Fail Rate
194
Total Tests
49,773
Avg Mileage

Data from official DVSA MOT testing records

1961 Triumph Herald 1200 MOT Analysis

The 1961 Triumph Herald 1200 has an MOT pass rate of 67.0% based on 194 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 49,773 miles on the odometer. With a 33.0% failure rate, the 1961 Herald 1200 is rated as "Good" for MOT reliability.

The leading cause of MOT failure for the 1961 Triumph Herald 1200 is Lamps, reflectors and electrical equipment, responsible for 0.5% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Brakes is the second most common issue at 0.5%.

Top failures specific to 1961 models only. The overall Herald 1200 page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Lamps, Reflectors And Electrical Equipment0.5%1
2Brakes0.5%1

Failures per 10,000 Miles

avg. 49,773 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Lamps & Electrical0.10% per 10K miBrakes0.10% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Lamps & Electrical0.100.5%1
Brakes0.100.5%1

Mileage Statistics

49,773
Mean
51,459
Median
31,354
25th Percentile
62,014
75th Percentile
6.63% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1961 Triumph Herald 1200 has an MOT pass rate of 67.0% based on 194 tests — slightly above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 49,773 miles on the odometer. With a 33.0% failure rate, the 1961 Herald 1200 is rated as "Good" for MOT reliability.

If you own or are considering buying a 1961 Triumph Herald 1200, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 49,773 miles, many of these vehicles are still in good mechanical condition.

Lamps, reflectors and electrical equipment — 0.5% of failures

Lamps, reflectors and electrical equipment issues account for 0.5% of MOT failures on 1961 Triumph Herald 1200 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Brakes — 0.5% of failures

Brakes issues account for 0.5% of MOT failures on 1961 Triumph Herald 1200 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue