1996 Triumph Speed Triple MOT Pass Rate
Pass rate for Speed Triple models manufactured in 1996, based on 564 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Speed Triple cars tested in 1996. Want to see how cars built in 1996 hold up over time?
View 1996 Triumph Speed Triple vintage page → (100.0% current pass rate)1996 Triumph Speed Triple MOT Analysis
The 1996 Triumph Speed Triple has an MOT pass rate of 85.3% based on 564 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 21,713 miles on the odometer. With a 14.7% failure rate, the 1996 Speed Triple is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 1996 Triumph Speed Triple is Motorcycle lamps and reflectors, responsible for 0.5% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Motorcycle brakes is the second most common issue at 0.2%.
Top failures specific to 1996 models only. The overall Speed Triple page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Motorcycle Lamps And Reflectors | 0.5% | 3 |
| 2 | Motorcycle Brakes | 0.2% | 1 |
Failures per 10,000 Miles
avg. 21,713 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Motorcycle lamps and reflectors | 0.24 | 0.5% | 3 |
| Motorcycle brakes | 0.08 | 0.2% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1996 Triumph Speed Triple has an MOT pass rate of 85.3% based on 564 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 21,713 miles on the odometer. With a 14.7% failure rate, the 1996 Speed Triple is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 1996 Triumph Speed Triple, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to motorcycle lamps and reflectors: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 21,713 miles, many of these vehicles are still in good mechanical condition.
Motorcycle lamps and reflectors — 0.5% of failures
Motorcycle lamps and reflectors issues account for 0.5% of MOT failures on 1996 Triumph Speed Triple models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Motorcycle brakes — 0.2% of failures
Motorcycle brakes issues account for 0.2% of MOT failures on 1996 Triumph Speed Triple models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.