Skip to main content
Pass Your MOT

1998 Vauxhall Combo Se 1.7d MOT Pass Rate

Pass rate for Combo Se 1.7d models manufactured in 1998, based on 53 real MOT test results.

56.6%
Pass Rate
43.4%
Fail Rate
53
Total Tests
131,087
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Combo Se 1.7d cars tested in 1998. Want to see how cars built in 1998 hold up over time?

View 1998 Vauxhall Combo Se 1.7d vintage page โ†’ (47.5% current pass rate)

1998 Vauxhall Combo Se 1.7d MOT Analysis

The 1998 Vauxhall Combo Se 1.7d has an MOT pass rate of 56.6% based on 53 tests โ€” slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 131,087 miles on the odometer. With a 43.4% failure rate, the 1998 Combo Se 1.7d is rated as "Below Average" for MOT reliability.

The leading cause of MOT failure for the 1998 Vauxhall Combo Se 1.7d is Body, chassis, structure, responsible for 1.9% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from ยฃ100โ€“500+. Brakes is the second most common issue at 1.9%. Lamps, reflectors and electrical equipment follows at 1.9%.

โš  Based on limited data (53 tests)

Top failures specific to 1998 models only. The overall Combo Se 1.7d page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Body, Chassis, Structure1.9%1
2Brakes1.9%1
3Lamps, Reflectors And Electrical Equipment1.9%1

Failures per 10,000 Miles

avg. 131,087 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Body & Structure0.14% per 10K miBrakes0.14% per 10K miLamps & Electrical0.14% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Body & Structure0.141.9%1
Brakes0.141.9%1
Lamps & Electrical0.141.9%1

Mileage Statistics

131,087
Mean
106,801
Median
84,962
25th Percentile
127,734
75th Percentile
3.31% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 1998 Vauxhall Combo Se 1.7d has an MOT pass rate of 56.6% based on 53 tests โ€” slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 131,087 miles on the odometer. With a 43.4% failure rate, the 1998 Combo Se 1.7d is rated as "Below Average" for MOT reliability.

If you own or are considering buying a 1998 Vauxhall Combo Se 1.7d, budget for potential repairs before each MOT. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With an average mileage of 131,087 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Body, chassis, structure โ€” 1.9% of failures

Body, chassis, structure issues account for 1.9% of MOT failures on 1998 Vauxhall Combo Se 1.7d models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: ยฃ100โ€“500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.

Brakes โ€” 1.9% of failures

Brakes issues account for 1.9% of MOT failures on 1998 Vauxhall Combo Se 1.7d models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Lamps, reflectors and electrical equipment โ€” 1.9% of failures

Lamps, reflectors and electrical equipment issues account for 1.9% of MOT failures on 1998 Vauxhall Combo Se 1.7d models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue