Skip to main content
Pass Your MOT

1999 Volkswagen Polo MOT Pass Rate

Pass rate for Polo models manufactured in 1999, based on 213,558 real MOT test results.

53.4%
Pass Rate
46.6%
Fail Rate
213,558
Total Tests
79,023
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Polo cars tested in 1999. Want to see how cars built in 1999 hold up over time?

View 1999 Volkswagen Polo vintage page โ†’ (64.0% current pass rate)

1999 Volkswagen Polo MOT Analysis

The 1999 Volkswagen Polo has an MOT pass rate of 53.4% based on 213,558 tests โ€” below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 79,023 miles on the odometer. With a 46.6% failure rate, the 1999 Polo is rated as "Poor" for MOT reliability.

The leading cause of MOT failure for the 1999 Volkswagen Polo is Suspension, responsible for 0.4% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from ยฃ200โ€“500. Brakes is the second most common issue at 0.3%. Noise, emissions and leaks follows at 0.2%.

Top failures specific to 1999 models only. The overall Polo page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension0.4%936
2Brakes0.3%708
3Noise, Emissions And Leaks0.2%500
4Tyres0.2%397
5Lamps, Reflectors And Electrical Equipment0.2%384
6Body, Chassis, Structure0.2%358
7Visibility0.1%194
8Identification Of The Vehicle0.1%131
9Seat Belts And Supplementary Restraint Systems0.1%130

Failures per 10,000 Miles

avg. 79,023 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension0.06% per 10K miBrakes0.04% per 10K miNoise, emissions and leaks0.03% per 10K miTyres0.02% per 10K miLamps & Electrical0.02% per 10K miBody & Structure0.02% per 10K miVisibility0.01% per 10K miIdentification of the vehicle0.01% per 10K miSeat Belts0.01% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension0.060.4%936
Brakes0.040.3%708
Noise, emissions and leaks0.030.2%500
Tyres0.020.2%397
Lamps & Electrical0.020.2%384
Body & Structure0.020.2%358
Visibility0.010.1%194
Identification of the vehicle0.010.1%131
Seat Belts0.010.1%130

Mileage Statistics

79,023
Mean
70,200
Median
49,054
25th Percentile
92,412
75th Percentile
5.90% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 1999 Volkswagen Polo has an MOT pass rate of 53.4% based on 213,558 tests โ€” below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 79,023 miles on the odometer. With a 46.6% failure rate, the 1999 Polo is rated as "Poor" for MOT reliability.

If you own or are considering buying a 1999 Volkswagen Polo, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. At 79,023 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Suspension โ€” 0.4% of failures

Suspension issues account for 0.4% of MOT failures on 1999 Volkswagen Polo models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Brakes โ€” 0.3% of failures

Brakes issues account for 0.3% of MOT failures on 1999 Volkswagen Polo models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Noise, emissions and leaks โ€” 0.2% of failures

Noise, emissions and leaks issues account for 0.2% of MOT failures on 1999 Volkswagen Polo models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: ยฃ100โ€“1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue