Skip to main content
Pass Your MOT

2012 Volkswagen Polo MOT Pass Rate

Pass rate for Polo models manufactured in 2012, based on 351,213 real MOT test results.

70.6%
Pass Rate
29.4%
Fail Rate
351,213
Total Tests
54,291
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Polo cars tested in 2012. Want to see how cars built in 2012 hold up over time?

View 2012 Volkswagen Polo vintage page โ†’ (64.2% current pass rate)

2012 Volkswagen Polo MOT Analysis

The 2012 Volkswagen Polo has an MOT pass rate of 70.6% based on 351,213 tests โ€” above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 54,291 miles on the odometer. With a 29.4% failure rate, the 2012 Polo is rated as "Very Good" for MOT reliability.

The leading cause of MOT failure for the 2012 Volkswagen Polo is Suspension, responsible for 4.3% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from ยฃ200โ€“500. Brakes is the second most common issue at 3.7%. Lamps, reflectors and electrical equipment follows at 3.6%.

Top failures specific to 2012 models only. The overall Polo page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension4.3%14,942
2Brakes3.7%12,885
3Lamps, Reflectors And Electrical Equipment3.6%12,584
4Tyres3.3%11,758
5Body, Chassis, Structure1.2%4,227
6Noise, Emissions And Leaks1.0%3,409
7Visibility0.8%2,969
8Non-component Advisories0.6%2,017
9Steering0.5%1,842
10Identification Of The Vehicle0.2%684
11Seat Belts And Supplementary Restraint Systems0.2%599
12Road Wheels0.1%353

Failures per 10,000 Miles

avg. 54,291 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension0.78% per 10K miBrakes0.68% per 10K miLamps & Electrical0.66% per 10K miTyres0.62% per 10K miBody & Structure0.22% per 10K miNoise, emissions and leaks0.18% per 10K miVisibility0.16% per 10K miNon-component advisories0.11% per 10K miSteering0.10% per 10K miIdentification of the vehicle0.04% per 10K miSeat Belts0.03% per 10K miWheels0.02% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension0.784.3%14,942
Brakes0.683.7%12,885
Lamps & Electrical0.663.6%12,584
Tyres0.623.3%11,758
Body & Structure0.221.2%4,227
Noise, emissions and leaks0.181.0%3,409
Visibility0.160.8%2,969
Non-component advisories0.110.6%2,017
Steering0.100.5%1,842
Identification of the vehicle0.040.2%684
Seat Belts0.030.2%599
Wheels0.020.1%353

Mileage Statistics

54,291
Mean
20,402
Median
11,539
25th Percentile
22,000
75th Percentile
5.42% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2012 Volkswagen Polo has an MOT pass rate of 70.6% based on 351,213 tests โ€” above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 54,291 miles on the odometer. With a 29.4% failure rate, the 2012 Polo is rated as "Very Good" for MOT reliability.

If you own or are considering buying a 2012 Volkswagen Polo, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. At 54,291 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Suspension โ€” 4.3% of failures

Suspension issues account for 4.3% of MOT failures on 2012 Volkswagen Polo models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Brakes โ€” 3.7% of failures

Brakes issues account for 3.7% of MOT failures on 2012 Volkswagen Polo models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Lamps, reflectors and electrical equipment โ€” 3.6% of failures

Lamps, reflectors and electrical equipment issues account for 3.6% of MOT failures on 2012 Volkswagen Polo models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue