Skip to main content
Pass Your MOT

2010 Volkswagen T2 Brazillian MOT Pass Rate

Pass rate for T2 Brazillian models manufactured in 2010, based on 51 real MOT test results.

78.4%
Pass Rate
21.6%
Fail Rate
51
Total Tests
47,310
Avg Mileage

Data from official DVSA MOT testing records

2010 Volkswagen T2 Brazillian MOT Analysis

The 2010 Volkswagen T2 Brazillian has an MOT pass rate of 78.4% based on 51 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 47,310 miles on the odometer. With a 21.6% failure rate, the 2010 T2 Brazillian is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 2010 Volkswagen T2 Brazillian is Lamps, reflectors and electrical equipment, responsible for 2.0% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Brakes is the second most common issue at 2.0%.

⚠ Based on limited data (51 tests)

Top failures specific to 2010 models only. The overall T2 Brazillian page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Lamps, Reflectors And Electrical Equipment2.0%1
2Brakes2.0%1

Failures per 10,000 Miles

avg. 47,310 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Lamps & Electrical0.41% per 10K miBrakes0.41% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Lamps & Electrical0.412.0%1
Brakes0.412.0%1

Mileage Statistics

47,310
Mean
35,677
Median
29,423
25th Percentile
74,023
75th Percentile
4.57% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 2010 Volkswagen T2 Brazillian has an MOT pass rate of 78.4% based on 51 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 47,310 miles on the odometer. With a 21.6% failure rate, the 2010 T2 Brazillian is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 2010 Volkswagen T2 Brazillian, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 47,310 miles, many of these vehicles are still in good mechanical condition.

Lamps, reflectors and electrical equipment — 2.0% of failures

Lamps, reflectors and electrical equipment issues account for 2.0% of MOT failures on 2010 Volkswagen T2 Brazillian models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Brakes — 2.0% of failures

Brakes issues account for 2.0% of MOT failures on 2010 Volkswagen T2 Brazillian models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue