1991 Volvo 300 Series MOT Pass Rate
Pass rate for 300 Series models manufactured in 1991, based on 49 real MOT test results.
Data from official DVSA MOT testing records
1991 Volvo 300 Series MOT Analysis
The 1991 Volvo 300 Series has an MOT pass rate of 59.2% based on 49 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 70,596 miles on the odometer. With a 40.8% failure rate, the 1991 300 Series is rated as "Below Average" for MOT reliability.
The leading cause of MOT failure for the 1991 Volvo 300 Series is Body, chassis, structure, responsible for 24.5% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Brakes is the second most common issue at 20.4%. Lamps, reflectors and electrical equipment follows at 8.2%.
Top failures specific to 1991 models only. The overall 300 Series page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 24.5% | 12 |
| 2 | Brakes | 20.4% | 10 |
| 3 | Lamps, Reflectors And Electrical Equipment | 8.2% | 4 |
| 4 | Noise, Emissions And Leaks | 8.2% | 4 |
| 5 | Non-component Advisories | 4.1% | 2 |
| 6 | Steering | 4.1% | 2 |
| 7 | Suspension | 4.1% | 2 |
Failures per 10,000 Miles
avg. 70,596 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 3.47 | 24.5% | 12 |
| Brakes | 2.89 | 20.4% | 10 |
| Lamps & Electrical | 1.16 | 8.2% | 4 |
| Noise, emissions and leaks | 1.16 | 8.2% | 4 |
| Non-component advisories | 0.58 | 4.1% | 2 |
| Steering | 0.58 | 4.1% | 2 |
| Suspension | 0.58 | 4.1% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1991 Volvo 300 Series has an MOT pass rate of 59.2% based on 49 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 70,596 miles on the odometer. With a 40.8% failure rate, the 1991 300 Series is rated as "Below Average" for MOT reliability.
If you own or are considering buying a 1991 Volvo 300 Series, budget for potential repairs before each MOT. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. At 70,596 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Body, chassis, structure — 24.5% of failures
Body, chassis, structure issues account for 24.5% of MOT failures on 1991 Volvo 300 Series models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Brakes — 20.4% of failures
Brakes issues account for 20.4% of MOT failures on 1991 Volvo 300 Series models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Lamps, reflectors and electrical equipment — 8.2% of failures
Lamps, reflectors and electrical equipment issues account for 8.2% of MOT failures on 1991 Volvo 300 Series models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.