Skip to main content
Pass Your MOT

1984 Volvo 340 MOT Pass Rate

Pass rate for 340 models manufactured in 1984, based on 271 real MOT test results.

58.7%
Pass Rate
41.3%
Fail Rate
271
Total Tests
61,552
Avg Mileage

Data from official DVSA MOT testing records

This page shows all 340 cars tested in 1984. Want to see how cars built in 1984 hold up over time?

View 1984 Volvo 340 vintage page โ†’ (61.5% current pass rate)

1984 Volvo 340 MOT Analysis

The 1984 Volvo 340 has an MOT pass rate of 58.7% based on 271 tests โ€” slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 61,552 miles on the odometer. With a 41.3% failure rate, the 1984 340 is rated as "Below Average" for MOT reliability.

The leading cause of MOT failure for the 1984 Volvo 340 is Lamps, reflectors and electrical equipment, responsible for 2.6% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from ยฃ5โ€“50. Brakes is the second most common issue at 1.1%.

Top failures specific to 1984 models only. The overall 340 page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Lamps, Reflectors And Electrical Equipment2.6%7
2Brakes1.1%3

Failures per 10,000 Miles

avg. 61,552 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Lamps & Electrical0.42% per 10K miBrakes0.18% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Lamps & Electrical0.422.6%7
Brakes0.181.1%3

Mileage Statistics

61,552
Mean
57,828
Median
38,842
25th Percentile
81,449
75th Percentile
6.71% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 1984 Volvo 340 has an MOT pass rate of 58.7% based on 271 tests โ€” slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 61,552 miles on the odometer. With a 41.3% failure rate, the 1984 340 is rated as "Below Average" for MOT reliability.

If you own or are considering buying a 1984 Volvo 340, budget for potential repairs before each MOT. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. At 61,552 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Lamps, reflectors and electrical equipment โ€” 2.6% of failures

Lamps, reflectors and electrical equipment issues account for 2.6% of MOT failures on 1984 Volvo 340 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Brakes โ€” 1.1% of failures

Brakes issues account for 1.1% of MOT failures on 1984 Volvo 340 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue