Skip to main content
Pass Your MOT

1993 Volvo 940 MOT Pass Rate

Pass rate for 940 models manufactured in 1993, based on 13,529 real MOT test results.

52.7%
Pass Rate
47.3%
Fail Rate
13,529
Total Tests
146,253
Avg Mileage

Data from official DVSA MOT testing records

This page shows all 940 cars tested in 1993. Want to see how cars built in 1993 hold up over time?

View 1993 Volvo 940 vintage page โ†’ (60.2% current pass rate)

1993 Volvo 940 MOT Analysis

The 1993 Volvo 940 has an MOT pass rate of 52.7% based on 13,529 tests โ€” below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 146,253 miles on the odometer. With a 47.3% failure rate, the 1993 940 is rated as "Poor" for MOT reliability.

The leading cause of MOT failure for the 1993 Volvo 940 is Suspension, responsible for 0.0% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from ยฃ200โ€“500. Lamps, reflectors and electrical equipment is the second most common issue at 0.0%. Body, chassis, structure follows at 0.0%.

Top failures specific to 1993 models only. The overall 940 page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count

Mileage Statistics

146,253
Mean
155,655
Median
120,279
25th Percentile
182,384
75th Percentile
3.23% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 1993 Volvo 940 has an MOT pass rate of 52.7% based on 13,529 tests โ€” below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 146,253 miles on the odometer. With a 47.3% failure rate, the 1993 940 is rated as "Poor" for MOT reliability.

If you own or are considering buying a 1993 Volvo 940, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With an average mileage of 146,253 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Suspension โ€” 0.0% of failures

Suspension issues account for 0.0% of MOT failures on 1993 Volvo 940 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Lamps, reflectors and electrical equipment โ€” 0.0% of failures

Lamps, reflectors and electrical equipment issues account for 0.0% of MOT failures on 1993 Volvo 940 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Body, chassis, structure โ€” 0.0% of failures

Body, chassis, structure issues account for 0.0% of MOT failures on 1993 Volvo 940 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: ยฃ100โ€“500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue