2011 Volvo V50 Se Drive Start/stop MOT Pass Rate
Pass rate for V50 Se Drive Start/stop models manufactured in 2011, based on 38 real MOT test results.
Data from official DVSA MOT testing records
2011 Volvo V50 Se Drive Start/stop MOT Analysis
The 2011 Volvo V50 Se Drive Start/stop has an MOT pass rate of 71.1% based on 38 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 86,807 miles on the odometer. With a 28.9% failure rate, the 2011 V50 Se Drive Start/stop is rated as "Very Good" for MOT reliability.
The leading cause of MOT failure for the 2011 Volvo V50 Se Drive Start/stop is Tyres, responsible for 7.9% of failures. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs range from £50–200 per tyre. Seat belts and supplementary restraint systems is the second most common issue at 2.6%. Visibility follows at 2.6%.
Top failures specific to 2011 models only. The overall V50 Se Drive Start/stop page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Tyres | 7.9% | 3 |
| 2 | Seat Belts And Supplementary Restraint Systems | 2.6% | 1 |
| 3 | Visibility | 2.6% | 1 |
Failures per 10,000 Miles
avg. 86,807 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Tyres | 0.91 | 7.9% | 3 |
| Seat Belts | 0.30 | 2.6% | 1 |
| Visibility | 0.30 | 2.6% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2011 Volvo V50 Se Drive Start/stop has an MOT pass rate of 71.1% based on 38 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 86,807 miles on the odometer. With a 28.9% failure rate, the 2011 V50 Se Drive Start/stop is rated as "Very Good" for MOT reliability.
If you own or are considering buying a 2011 Volvo V50 Se Drive Start/stop, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to tyres: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating. With an average mileage of 86,807 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Tyres — 7.9% of failures
Tyres issues account for 7.9% of MOT failures on 2011 Volvo V50 Se Drive Start/stop models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Seat belts and supplementary restraint systems — 2.6% of failures
Seat belts and supplementary restraint systems issues account for 2.6% of MOT failures on 2011 Volvo V50 Se Drive Start/stop models. Seat belt failures include frayed or cut webbing, faulty retractors, buckles that don't latch properly, and missing or damaged anchorages. All fitted seat belts must be functional. Typical repair costs: £50–200 per belt. Pre-MOT check: Pull each seat belt fully out and check for fraying, cuts, or fading. Ensure each belt retracts smoothly and the buckle clicks securely. Check the pre-tensioner warning light on the dashboard.
Visibility — 2.6% of failures
Visibility issues account for 2.6% of MOT failures on 2011 Volvo V50 Se Drive Start/stop models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.