Cupra Ateca Vz2 Tsi 4drive S-a MOT Pass Rate
Overall pass rate across all manufacture years, based on 93 real MOT test results. Failure rate: 7.5%.
Data from official DVSA MOT testing records
Cupra Ateca Vz2 Tsi 4drive S-a MOT Reliability Overview
The Cupra Ateca Vz2 Tsi 4drive S-a is a rare vehicle in the UK, with 93 MOT test results recorded in our database spanning 1 manufacture years. It has an overall MOT pass rate of 92.5% and a failure rate of 7.5%, which is well above the UK average of approximately 37%.
Based on this data, the Cupra Ateca Vz2 Tsi 4drive S-a earns a "Excellent" reliability rating. The average Cupra Ateca Vz2 Tsi 4drive S-a presents for MOT with approximately 31,504 miles on the clock. The 2021 manufacture year performs best with a 92.3% pass rate.
The most common MOT failure for the Cupra Ateca Vz2 Tsi 4drive S-a is Tyres, affecting 10.8% of all tests. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. The second most common issue is Visibility at 3.2%. Suspension rounds out the top three at 1.1%. Together, these top 3 failure categories account for a significant portion of all MOT failures for this model.
Top failures across all manufacture years combined. Individual year pages may show different top failures.
What Fails Most
Best Year to Buy
📈 How Each Vintage Ages
Pass Rate by Manufacture Year
* High Fail Rate badge indicates an MOT pass rate below 65% (failure rate above 35%).
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Tyres | 10.8% | 10 |
| 2 | Visibility | 3.2% | 3 |
| 3 | Suspension | 1.1% | 1 |
Failures per 10,000 Miles
avg. 31,504 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Tyres | 3.41 | 10.8% | 10 |
| Visibility | 1.02 | 3.2% | 3 |
| Suspension | 0.34 | 1.1% | 1 |
🚗 Similar Cars to Consider
Mileage at MOT
The average Cupra Ateca Vz2 Tsi 4drive S-a has 31,504 miles when tested for MOT.
📊 Mileage-Adjusted Failure Rate
How often this car fails MOT relative to how much it's driven — a fairer comparison than raw pass rate.
The Cupra Ateca Vz2 Tsi 4drive S-a has a mileage-adjusted failure rate of 2.38% per 10,000 miles driven. The average across all makes is 5.38%, so this model is better than average.
About Cupra Ateca Vz2 Tsi 4drive S-a MOT Data
The Cupra Ateca Vz2 Tsi 4drive S-a is a rare vehicle in the UK, with 93 MOT test results recorded in our database spanning 1 manufacture years. It has an overall MOT pass rate of 92.5% and a failure rate of 7.5%, which is well above the UK average of approximately 37%.
For Cupra Ateca Vz2 Tsi 4drive S-a owners, these results suggest a reliable vehicle that generally passes its MOT without major issues. Focus your pre-MOT checks on tyres and visibility for the best chance of a first-time pass. Use our detailed year-by-year breakdown and failure analysis below to understand how your specific Ateca Vz2 Tsi 4drive S-a is likely to perform.
Tyres — 10.8% of failures
Tyres issues account for 10.8% of MOT failures on the Cupra Ateca Vz2 Tsi 4drive S-a. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Visibility — 3.2% of failures
Visibility issues account for 3.2% of MOT failures on the Cupra Ateca Vz2 Tsi 4drive S-a. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Suspension — 1.1% of failures
Suspension issues account for 1.1% of MOT failures on the Cupra Ateca Vz2 Tsi 4drive S-a. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Frequently Asked Questions
What is the MOT pass rate for the Cupra Ateca Vz2 Tsi 4drive S-a?
Based on 93 (based on limited data) MOT tests in our database, the Cupra Ateca Vz2 Tsi 4drive S-a has an overall pass rate of 92.5% (7.5% fail rate).
What are the most common MOT failures on a Cupra Ateca Vz2 Tsi 4drive S-a?
The top 3 reasons a Cupra Ateca Vz2 Tsi 4drive S-a fails its MOT are: 1. Tyres (10.8%), 2. Visibility (3.2%), 3. Suspension (1.1%). Check these areas before booking your MOT.
Is the Cupra Ateca Vz2 Tsi 4drive S-a reliable?
With a 7.5% MOT failure rate, the Ateca Vz2 Tsi 4drive S-a is more reliable than average compared to the UK average of ~40%.
What should I check before an MOT on my Cupra Ateca Vz2 Tsi 4drive S-a?
Based on failure data, focus on: Tyres (10.8%); Visibility (3.2%); Suspension (1.1%). These are the areas most likely to cause a fail. Also check all lights, tyres (minimum 1.6mm tread), and windscreen condition — these are quick wins that apply to all cars.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.