2021 Cupra Ateca Vz2 Tsi 4drive S-a MOT Pass Rate
Pass rate for Ateca Vz2 Tsi 4drive S-a models manufactured in 2021, based on 91 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Ateca Vz2 Tsi 4drive S-a cars tested in 2021. Want to see how cars built in 2021 hold up over time?
View 2021 Cupra Ateca Vz2 Tsi 4drive S-a vintage page → (92.2% current pass rate)2021 Cupra Ateca Vz2 Tsi 4drive S-a MOT Analysis
The 2021 Cupra Ateca Vz2 Tsi 4drive S-a has an MOT pass rate of 92.3% based on 91 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 31,908 miles on the odometer. With a 7.7% failure rate, the 2021 Ateca Vz2 Tsi 4drive S-a is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2021 Cupra Ateca Vz2 Tsi 4drive S-a is Tyres, responsible for 11.0% of failures. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs range from £50–200 per tyre. Visibility is the second most common issue at 3.3%. Suspension follows at 1.1%.
Top failures specific to 2021 models only. The overall Ateca Vz2 Tsi 4drive S-a page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Tyres | 11.0% | 10 |
| 2 | Visibility | 3.3% | 3 |
| 3 | Suspension | 1.1% | 1 |
Failures per 10,000 Miles
avg. 31,908 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Tyres | 3.44 | 11.0% | 10 |
| Visibility | 1.03 | 3.3% | 3 |
| Suspension | 0.34 | 1.1% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2021 Cupra Ateca Vz2 Tsi 4drive S-a has an MOT pass rate of 92.3% based on 91 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 31,908 miles on the odometer. With a 7.7% failure rate, the 2021 Ateca Vz2 Tsi 4drive S-a is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2021 Cupra Ateca Vz2 Tsi 4drive S-a, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to tyres: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating. With relatively low average mileage of 31,908 miles, many of these vehicles are still in good mechanical condition.
Tyres — 11.0% of failures
Tyres issues account for 11.0% of MOT failures on 2021 Cupra Ateca Vz2 Tsi 4drive S-a models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Visibility — 3.3% of failures
Visibility issues account for 3.3% of MOT failures on 2021 Cupra Ateca Vz2 Tsi 4drive S-a models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Suspension — 1.1% of failures
Suspension issues account for 1.1% of MOT failures on 2021 Cupra Ateca Vz2 Tsi 4drive S-a models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.