Skip to main content
Pass Your MOT

1997 Ferrari 550 MOT Pass Rate

Pass rate for 550 models manufactured in 1997, based on 580 real MOT test results.

85.7%
Pass Rate
14.3%
Fail Rate
580
Total Tests
40,676
Avg Mileage

Data from official DVSA MOT testing records

This page shows all 550 cars tested in 1997. Want to see how cars built in 1997 hold up over time?

View 1997 Ferrari 550 vintage page โ†’ (80.9% current pass rate)

1997 Ferrari 550 MOT Analysis

The 1997 Ferrari 550 has an MOT pass rate of 85.7% based on 580 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 40,676 miles on the odometer. With a 14.3% failure rate, the 1997 550 is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 1997 Ferrari 550 is Identification of the vehicle, responsible for 1.7% of failures. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs range from ยฃ10โ€“50. Tyres is the second most common issue at 1.4%. Noise, emissions and leaks follows at 0.7%.

Top failures specific to 1997 models only. The overall 550 page may show different rankings.

What Fails Most

Identification of the vehicle 1.7%
Tyres 1.4%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Identification Of The Vehicle1.7%10
2Tyres1.4%8
3Noise, Emissions And Leaks0.7%4
4Seat Belts And Supplementary Restraint Systems0.3%2
5Lamps, Reflectors And Electrical Equipment0.2%1
6Brakes0.2%1

Failures per 10,000 Miles

avg. 40,676 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Identification of the vehicle0.42% per 10K miTyres0.34% per 10K miNoise, emissions and leaks0.17% per 10K miSeat Belts0.08% per 10K miLamps & Electrical0.04% per 10K miBrakes0.04% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Identification of the vehicle0.421.7%10
Tyres0.341.4%8
Noise, emissions and leaks0.170.7%4
Seat Belts0.080.3%2
Lamps & Electrical0.040.2%1
Brakes0.040.2%1

Mileage Statistics

40,676
Mean
44,516
Median
31,339
25th Percentile
62,559
75th Percentile
3.52% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 1997 Ferrari 550 has an MOT pass rate of 85.7% based on 580 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 40,676 miles on the odometer. With a 14.3% failure rate, the 1997 550 is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 1997 Ferrari 550, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to identification of the vehicle: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing. With relatively low average mileage of 40,676 miles, many of these vehicles are still in good mechanical condition.

Identification of the vehicle โ€” 1.7% of failures

Identification of the vehicle issues account for 1.7% of MOT failures on 1997 Ferrari 550 models. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs: ยฃ10โ€“50. Pre-MOT check: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing.

Tyres โ€” 1.4% of failures

Tyres issues account for 1.4% of MOT failures on 1997 Ferrari 550 models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: ยฃ50โ€“200 per tyre. Pre-MOT check: Check tread depth with a 20p coin โ€” if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Noise, emissions and leaks โ€” 0.7% of failures

Noise, emissions and leaks issues account for 0.7% of MOT failures on 1997 Ferrari 550 models. Emissions failures occur when exhaust gases exceed legal limits for carbon monoxide (CO), hydrocarbons (HC), or particulate matter (diesel). Common causes include faulty oxygen sensors, clogged catalytic converters, or DPF issues on diesel vehicles. Typical repair costs: ยฃ100โ€“1,000+. Pre-MOT check: If the engine management light is on, get it diagnosed before the MOT. For diesel cars, ensure the DPF has completed a regeneration cycle. Regular servicing and using premium fuel before the test can help.

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue