2011 Honda Cr-v Ex I-vtec MOT Pass Rate
Pass rate for Cr-v Ex I-vtec models manufactured in 2011, based on 156 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Cr-v Ex I-vtec cars tested in 2011. Want to see how cars built in 2011 hold up over time?
View 2011 Honda Cr-v Ex I-vtec vintage page → (63.3% current pass rate)2011 Honda Cr-v Ex I-vtec MOT Analysis
The 2011 Honda Cr-v Ex I-vtec has an MOT pass rate of 84.6% based on 156 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 41,861 miles on the odometer. With a 15.4% failure rate, the 2011 Cr-v Ex I-vtec is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2011 Honda Cr-v Ex I-vtec is Lamps, reflectors and electrical equipment, responsible for 1.9% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Seat belts and supplementary restraint systems is the second most common issue at 0.6%.
Top failures specific to 2011 models only. The overall Cr-v Ex I-vtec page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Lamps, Reflectors And Electrical Equipment | 1.9% | 3 |
| 2 | Seat Belts And Supplementary Restraint Systems | 0.6% | 1 |
Failures per 10,000 Miles
avg. 41,861 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Lamps & Electrical | 0.46 | 1.9% | 3 |
| Seat Belts | 0.15 | 0.6% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2011 Honda Cr-v Ex I-vtec has an MOT pass rate of 84.6% based on 156 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 41,861 miles on the odometer. With a 15.4% failure rate, the 2011 Cr-v Ex I-vtec is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2011 Honda Cr-v Ex I-vtec, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 41,861 miles, many of these vehicles are still in good mechanical condition.
Lamps, reflectors and electrical equipment — 1.9% of failures
Lamps, reflectors and electrical equipment issues account for 1.9% of MOT failures on 2011 Honda Cr-v Ex I-vtec models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Seat belts and supplementary restraint systems — 0.6% of failures
Seat belts and supplementary restraint systems issues account for 0.6% of MOT failures on 2011 Honda Cr-v Ex I-vtec models. Seat belt failures include frayed or cut webbing, faulty retractors, buckles that don't latch properly, and missing or damaged anchorages. All fitted seat belts must be functional. Typical repair costs: £50–200 per belt. Pre-MOT check: Pull each seat belt fully out and check for fraying, cuts, or fading. Ensure each belt retracts smoothly and the buckle clicks securely. Check the pre-tensioner warning light on the dashboard.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.