1995 Honda Integra MOT Pass Rate
Pass rate for Integra models manufactured in 1995, based on 406 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Integra cars tested in 1995. Want to see how cars built in 1995 hold up over time?
View 1995 Honda Integra vintage page → (47.1% current pass rate)1995 Honda Integra MOT Analysis
The 1995 Honda Integra has an MOT pass rate of 55.4% based on 406 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 127,927 miles on the odometer. With a 44.6% failure rate, the 1995 Integra is rated as "Below Average" for MOT reliability.
The leading cause of MOT failure for the 1995 Honda Integra is Body, chassis, structure, responsible for 0.7% of failures. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs range from £100–500+. Tyres is the second most common issue at 0.5%. Brakes follows at 0.5%.
Top failures specific to 1995 models only. The overall Integra page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Body, Chassis, Structure | 0.7% | 3 |
| 2 | Tyres | 0.5% | 2 |
| 3 | Brakes | 0.5% | 2 |
| 4 | Lamps, Reflectors And Electrical Equipment | 0.5% | 2 |
| 5 | Suspension | 0.2% | 1 |
Failures per 10,000 Miles
avg. 127,927 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Body & Structure | 0.06 | 0.7% | 3 |
| Tyres | 0.04 | 0.5% | 2 |
| Brakes | 0.04 | 0.5% | 2 |
| Lamps & Electrical | 0.04 | 0.5% | 2 |
| Suspension | 0.02 | 0.2% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1995 Honda Integra has an MOT pass rate of 55.4% based on 406 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 127,927 miles on the odometer. With a 44.6% failure rate, the 1995 Integra is rated as "Below Average" for MOT reliability.
If you own or are considering buying a 1995 Honda Integra, budget for potential repairs before each MOT. Before your MOT, pay particular attention to body, chassis, structure: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely. With an average mileage of 127,927 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Body, chassis, structure — 0.7% of failures
Body, chassis, structure issues account for 0.7% of MOT failures on 1995 Honda Integra models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Tyres — 0.5% of failures
Tyres issues account for 0.5% of MOT failures on 1995 Honda Integra models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Brakes — 0.5% of failures
Brakes issues account for 0.5% of MOT failures on 1995 Honda Integra models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.