Skip to main content
Pass Your MOT

2009 Honda St 1300 A-9 MOT Pass Rate

Pass rate for St 1300 A-9 models manufactured in 2009, based on 520 real MOT test results.

94.6%
Pass Rate
5.4%
Fail Rate
520
Total Tests
30,607
Avg Mileage

Data from official DVSA MOT testing records

This page shows all St 1300 A-9 cars tested in 2009. Want to see how cars built in 2009 hold up over time?

View 2009 Honda St 1300 A-9 vintage page โ†’ (95.0% current pass rate)

2009 Honda St 1300 A-9 MOT Analysis

The 2009 Honda St 1300 A-9 has an MOT pass rate of 94.6% based on 520 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 30,607 miles on the odometer. With a 5.4% failure rate, the 2009 St 1300 A-9 is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 2009 Honda St 1300 A-9 is Motorcycle tyres, responsible for 0.4% of failures. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs range from ยฃ50โ€“200 per tyre. Motorcycle brakes is the second most common issue at 0.2%.

Top failures specific to 2009 models only. The overall St 1300 A-9 page may show different rankings.

What Fails Most

Motorcycle tyres 0.4%
Motorcycle brakes 0.2%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Motorcycle Tyres0.4%2
2Motorcycle Brakes0.2%1

Failures per 10,000 Miles

avg. 30,607 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Motorcycle tyres0.13% per 10K miMotorcycle brakes0.06% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Motorcycle tyres0.130.4%2
Motorcycle brakes0.060.2%1

Mileage Statistics

30,607
Mean
22,381
Median
12,093
25th Percentile
44,999
75th Percentile
1.76% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2009 Honda St 1300 A-9 has an MOT pass rate of 94.6% based on 520 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 30,607 miles on the odometer. With a 5.4% failure rate, the 2009 St 1300 A-9 is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 2009 Honda St 1300 A-9, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to motorcycle tyres: Check tread depth with a 20p coin โ€” if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating. With relatively low average mileage of 30,607 miles, many of these vehicles are still in good mechanical condition.

Motorcycle tyres โ€” 0.4% of failures

Motorcycle tyres issues account for 0.4% of MOT failures on 2009 Honda St 1300 A-9 models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: ยฃ50โ€“200 per tyre. Pre-MOT check: Check tread depth with a 20p coin โ€” if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Motorcycle brakes โ€” 0.2% of failures

Motorcycle brakes issues account for 0.2% of MOT failures on 2009 Honda St 1300 A-9 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue