Skip to main content
Pass Your MOT

1998 Honda Vtr MOT Pass Rate

Pass rate for Vtr models manufactured in 1998, based on 396 real MOT test results.

78.0%
Pass Rate
22.0%
Fail Rate
396
Total Tests
29,386
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Vtr cars tested in 1998. Want to see how cars built in 1998 hold up over time?

View 1998 Honda Vtr vintage page โ†’ (81.4% current pass rate)

1998 Honda Vtr MOT Analysis

The 1998 Honda Vtr has an MOT pass rate of 78.0% based on 396 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 29,386 miles on the odometer. With a 22.0% failure rate, the 1998 Vtr is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 1998 Honda Vtr is Identification of the vehicle, responsible for 0.3% of failures. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs range from ยฃ10โ€“50. Motorcycle brakes is the second most common issue at 0.3%.

Top failures specific to 1998 models only. The overall Vtr page may show different rankings.

What Fails Most

Identification of the vehicle 0.3%
Motorcycle brakes 0.3%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Identification Of The Vehicle0.3%1
2Motorcycle Brakes0.3%1

Failures per 10,000 Miles

avg. 29,386 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Identification of the vehicle0.09% per 10K miMotorcycle brakes0.09% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Identification of the vehicle0.090.3%1
Motorcycle brakes0.090.3%1

Mileage Statistics

29,386
Mean
26,825
Median
20,427
25th Percentile
51,432
75th Percentile
7.49% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 1998 Honda Vtr has an MOT pass rate of 78.0% based on 396 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 29,386 miles on the odometer. With a 22.0% failure rate, the 1998 Vtr is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 1998 Honda Vtr, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to identification of the vehicle: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing. With relatively low average mileage of 29,386 miles, many of these vehicles are still in good mechanical condition.

Identification of the vehicle โ€” 0.3% of failures

Identification of the vehicle issues account for 0.3% of MOT failures on 1998 Honda Vtr models. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs: ยฃ10โ€“50. Pre-MOT check: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing.

Motorcycle brakes โ€” 0.3% of failures

Motorcycle brakes issues account for 0.3% of MOT failures on 1998 Honda Vtr models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue