2013 Lexmoto Gladiator 125 MOT Pass Rate
Pass rate for Gladiator 125 models manufactured in 2013, based on 744 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Gladiator 125 cars tested in 2013. Want to see how cars built in 2013 hold up over time?
View 2013 Lexmoto Gladiator 125 vintage page → (62.5% current pass rate)2013 Lexmoto Gladiator 125 MOT Analysis
The 2013 Lexmoto Gladiator 125 has an MOT pass rate of 57.9% based on 744 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 9,783 miles on the odometer. With a 42.1% failure rate, the 2013 Gladiator 125 is rated as "Below Average" for MOT reliability.
The leading cause of MOT failure for the 2013 Lexmoto Gladiator 125 is Motorcycle brakes, responsible for 0.7% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Motorcycle lamps and reflectors is the second most common issue at 0.7%. Motorcycle suspension follows at 0.5%.
Top failures specific to 2013 models only. The overall Gladiator 125 page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Motorcycle Brakes | 0.7% | 5 |
| 2 | Motorcycle Lamps And Reflectors | 0.7% | 5 |
| 3 | Motorcycle Suspension | 0.5% | 4 |
| 4 | Motorcycle Tyres | 0.5% | 4 |
| 5 | Motorcycle Structure And Attachments | 0.5% | 4 |
| 6 | Motorcycle Steering | 0.3% | 2 |
| 7 | Motorcycle Wheels | 0.1% | 1 |
Failures per 10,000 Miles
avg. 9,783 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Motorcycle brakes | 0.69 | 0.7% | 5 |
| Motorcycle lamps and reflectors | 0.69 | 0.7% | 5 |
| Motorcycle suspension | 0.55 | 0.5% | 4 |
| Motorcycle tyres | 0.55 | 0.5% | 4 |
| Motorcycle structure and attachments | 0.55 | 0.5% | 4 |
| Motorcycle steering | 0.27 | 0.3% | 2 |
| Motorcycle wheels | 0.14 | 0.1% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2013 Lexmoto Gladiator 125 has an MOT pass rate of 57.9% based on 744 tests — slightly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 9,783 miles on the odometer. With a 42.1% failure rate, the 2013 Gladiator 125 is rated as "Below Average" for MOT reliability.
If you own or are considering buying a 2013 Lexmoto Gladiator 125, budget for potential repairs before each MOT. Before your MOT, pay particular attention to motorcycle brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With relatively low average mileage of 9,783 miles, many of these vehicles are still in good mechanical condition.
Motorcycle brakes — 0.7% of failures
Motorcycle brakes issues account for 0.7% of MOT failures on 2013 Lexmoto Gladiator 125 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Motorcycle lamps and reflectors — 0.7% of failures
Motorcycle lamps and reflectors issues account for 0.7% of MOT failures on 2013 Lexmoto Gladiator 125 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Motorcycle suspension — 0.5% of failures
Motorcycle suspension issues account for 0.5% of MOT failures on 2013 Lexmoto Gladiator 125 models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.