Skip to main content
Pass Your MOT

2000 Mercedes-Benz 308 MOT Pass Rate

Pass rate for 308 models manufactured in 2000, based on 98 real MOT test results.

50.0%
Pass Rate
50.0%
Fail Rate
98
Total Tests
157,767
Avg Mileage

Data from official DVSA MOT testing records

2000 Mercedes-Benz 308 MOT Analysis

The 2000 Mercedes-Benz 308 has an MOT pass rate of 50.0% based on 98 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 157,767 miles on the odometer. With a 50.0% failure rate, the 2000 308 is rated as "Very Poor" for MOT reliability.

The leading cause of MOT failure for the 2000 Mercedes-Benz 308 is Brakes, responsible for 11.2% of failures. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs range from £150–400. Body, chassis, structure is the second most common issue at 10.2%. Lamps, reflectors and electrical equipment follows at 7.1%.

⚠ Based on limited data (98 tests)

Top failures specific to 2000 models only. The overall 308 page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Brakes11.2%11
2Body, Chassis, Structure10.2%10
3Lamps, Reflectors And Electrical Equipment7.1%7
4Suspension2.0%2
5Tyres2.0%2
6Visibility2.0%2
7Noise, Emissions And Leaks1.0%1

Failures per 10,000 Miles

avg. 157,767 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Brakes0.71% per 10K miBody & Structure0.65% per 10K miLamps & Electrical0.45% per 10K miSuspension0.13% per 10K miTyres0.13% per 10K miVisibility0.13% per 10K miNoise, emissions and leaks0.06% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Brakes0.7111.2%11
Body & Structure0.6510.2%10
Lamps & Electrical0.457.1%7
Suspension0.132.0%2
Tyres0.132.0%2
Visibility0.132.0%2
Noise, emissions and leaks0.061.0%1

Mileage Statistics

157,767
Mean
196,422
Median
130,766
25th Percentile
246,676
75th Percentile
3.17% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 2000 Mercedes-Benz 308 has an MOT pass rate of 50.0% based on 98 tests — significantly below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 157,767 miles on the odometer. With a 50.0% failure rate, the 2000 308 is rated as "Very Poor" for MOT reliability.

If you own or are considering buying a 2000 Mercedes-Benz 308, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to brakes: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm). With an average mileage of 157,767 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Brakes — 11.2% of failures

Brakes issues account for 11.2% of MOT failures on 2000 Mercedes-Benz 308 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Body, chassis, structure — 10.2% of failures

Body, chassis, structure issues account for 10.2% of MOT failures on 2000 Mercedes-Benz 308 models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.

Lamps, reflectors and electrical equipment — 7.1% of failures

Lamps, reflectors and electrical equipment issues account for 7.1% of MOT failures on 2000 Mercedes-Benz 308 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue