2010 Nissan Cabstar 34.11 S/c Swb MOT Pass Rate
Pass rate for Cabstar 34.11 S/c Swb models manufactured in 2010, based on 152 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Cabstar 34.11 S/c Swb cars tested in 2010. Want to see how cars built in 2010 hold up over time?
View 2010 Nissan Cabstar 34.11 S/c Swb vintage page → (47.4% current pass rate)2010 Nissan Cabstar 34.11 S/c Swb MOT Analysis
The 2010 Nissan Cabstar 34.11 S/c Swb has an MOT pass rate of 52.6% based on 152 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 52,393 miles on the odometer. With a 47.4% failure rate, the 2010 Cabstar 34.11 S/c Swb is rated as "Poor" for MOT reliability.
The leading cause of MOT failure for the 2010 Nissan Cabstar 34.11 S/c Swb is Suspension, responsible for 38.2% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Brakes is the second most common issue at 34.2%. Lamps, Reflectors and Electrical Equipment follows at 14.5%.
Top failures specific to 2010 models only. The overall Cabstar 34.11 S/c Swb page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 38.2% | 58 |
| 2 | Brakes | 34.2% | 52 |
| 3 | Lamps, Reflectors And Electrical Equipment | 14.5% | 22 |
| 4 | Driver's View Of The Road | 9.9% | 15 |
| 5 | Tyres | 7.2% | 11 |
| 6 | Exhaust, Fuel And Emissions | 4.6% | 7 |
| 7 | Body, Structure And General Items | 3.3% | 5 |
| 8 | Non-component Advisories | 2.6% | 4 |
| 9 | Steering | 1.3% | 2 |
| 10 | Seat Belts And Supplementary Restraint Systems | 0.7% | 1 |
Failures per 10,000 Miles
avg. 52,393 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 7.28 | 38.2% | 58 |
| Brakes | 6.53 | 34.2% | 52 |
| Lamps & Electrical | 2.76 | 14.5% | 22 |
| Visibility | 1.88 | 9.9% | 15 |
| Tyres | 1.38 | 7.2% | 11 |
| Emissions & Exhaust | 0.88 | 4.6% | 7 |
| Body & Structure | 0.63 | 3.3% | 5 |
| Non-component advisories | 0.50 | 2.6% | 4 |
| Steering | 0.25 | 1.3% | 2 |
| Seat Belts | 0.13 | 0.7% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 2010 Nissan Cabstar 34.11 S/c Swb has an MOT pass rate of 52.6% based on 152 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 52,393 miles on the odometer. With a 47.4% failure rate, the 2010 Cabstar 34.11 S/c Swb is rated as "Poor" for MOT reliability.
If you own or are considering buying a 2010 Nissan Cabstar 34.11 S/c Swb, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. At 52,393 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Suspension — 38.2% of failures
Suspension issues account for 38.2% of MOT failures on 2010 Nissan Cabstar 34.11 S/c Swb models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Brakes — 34.2% of failures
Brakes issues account for 34.2% of MOT failures on 2010 Nissan Cabstar 34.11 S/c Swb models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Lamps, Reflectors and Electrical Equipment — 14.5% of failures
Lamps, Reflectors and Electrical Equipment issues account for 14.5% of MOT failures on 2010 Nissan Cabstar 34.11 S/c Swb models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.