Skip to main content
Pass Your MOT

2013 Nissan Cube MOT Pass Rate

Pass rate for Cube models manufactured in 2013, based on 361 real MOT test results.

87.5%
Pass Rate
12.5%
Fail Rate
361
Total Tests
74,468
Avg Mileage

Data from official DVSA MOT testing records

This page shows all Cube cars tested in 2013. Want to see how cars built in 2013 hold up over time?

View 2013 Nissan Cube vintage page โ†’ (94.7% current pass rate)

2013 Nissan Cube MOT Analysis

The 2013 Nissan Cube has an MOT pass rate of 87.5% based on 361 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 74,468 miles on the odometer. With a 12.5% failure rate, the 2013 Cube is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 2013 Nissan Cube is Suspension, responsible for 3.0% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from ยฃ200โ€“500. Lamps, reflectors and electrical equipment is the second most common issue at 2.8%. Brakes follows at 1.9%.

Top failures specific to 2013 models only. The overall Cube page may show different rankings.

What Fails Most

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension3.0%11
2Lamps, Reflectors And Electrical Equipment2.8%10
3Brakes1.9%7
4Noise, Emissions And Leaks1.7%6
5Body, Chassis, Structure0.8%3
6Visibility0.6%2
7Tyres0.3%1

Failures per 10,000 Miles

avg. 74,468 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension0.41% per 10K miLamps & Electrical0.37% per 10K miBrakes0.26% per 10K miNoise, emissions and leaks0.22% per 10K miBody & Structure0.11% per 10K miVisibility0.07% per 10K miTyres0.04% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension0.413.0%11
Lamps & Electrical0.372.8%10
Brakes0.261.9%7
Noise, emissions and leaks0.221.7%6
Body & Structure0.110.8%3
Visibility0.070.6%2
Tyres0.040.3%1

Mileage Statistics

74,468
Mean
98,812
Median
42,052
25th Percentile
117,341
75th Percentile
1.68% failures per 10K miles

Mileage-adjusted failure rate โ€” accounts for how much this model year is typically driven.

About This Data

The 2013 Nissan Cube has an MOT pass rate of 87.5% based on 361 tests โ€” well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 74,468 miles on the odometer. With a 12.5% failure rate, the 2013 Cube is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 2013 Nissan Cube, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. At 74,468 average miles, these vehicles are in the mid-range where component wear starts to become a factor.

Suspension โ€” 3.0% of failures

Suspension issues account for 3.0% of MOT failures on 2013 Nissan Cube models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: ยฃ200โ€“500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Lamps, reflectors and electrical equipment โ€” 2.8% of failures

Lamps, reflectors and electrical equipment issues account for 2.8% of MOT failures on 2013 Nissan Cube models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: ยฃ5โ€“50. Pre-MOT check: Walk around the car and check every light โ€” headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Brakes โ€” 1.9% of failures

Brakes issues account for 1.9% of MOT failures on 2013 Nissan Cube models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components โ€” any brake deficiency will result in an MOT fail. Typical repair costs: ยฃ150โ€“400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel โ€” if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005โ€“2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue