1990 Nissan Pao MOT Pass Rate
Pass rate for Pao models manufactured in 1990, based on 364 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Pao cars tested in 1990. Want to see how cars built in 1990 hold up over time?
View 1990 Nissan Pao vintage page → (66.7% current pass rate)1990 Nissan Pao MOT Analysis
The 1990 Nissan Pao has an MOT pass rate of 53.0% based on 364 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 119,703 miles on the odometer. With a 47.0% failure rate, the 1990 Pao is rated as "Poor" for MOT reliability.
The leading cause of MOT failure for the 1990 Nissan Pao is Tyres, responsible for 1.1% of failures. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs range from £50–200 per tyre. Visibility is the second most common issue at 0.5%. Brakes follows at 0.3%.
Top failures specific to 1990 models only. The overall Pao page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Tyres | 1.1% | 4 |
| 2 | Visibility | 0.5% | 2 |
| 3 | Brakes | 0.3% | 1 |
| 4 | Noise, Emissions And Leaks | 0.3% | 1 |
Failures per 10,000 Miles
avg. 119,703 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Tyres | 0.09 | 1.1% | 4 |
| Visibility | 0.05 | 0.5% | 2 |
| Brakes | 0.02 | 0.3% | 1 |
| Noise, emissions and leaks | 0.02 | 0.3% | 1 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1990 Nissan Pao has an MOT pass rate of 53.0% based on 364 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 119,703 miles on the odometer. With a 47.0% failure rate, the 1990 Pao is rated as "Poor" for MOT reliability.
If you own or are considering buying a 1990 Nissan Pao, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to tyres: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating. With an average mileage of 119,703 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.
Tyres — 1.1% of failures
Tyres issues account for 1.1% of MOT failures on 1990 Nissan Pao models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.
Visibility — 0.5% of failures
Visibility issues account for 0.5% of MOT failures on 1990 Nissan Pao models. Visibility failures relate to the windscreen, wipers, washers, mirrors, and view-obstructing damage. Cracks in the windscreen swept area, ineffective wipers, or empty washer bottles are common causes. Typical repair costs: £10–300. Pre-MOT check: Check the windscreen for chips and cracks — damage larger than 10mm in the driver's swept area or 40mm elsewhere will fail. Test washers and wipers. Ensure both door mirrors are intact and adjustable.
Brakes — 0.3% of failures
Brakes issues account for 0.3% of MOT failures on 1990 Nissan Pao models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.