Skip to main content
Pass Your MOT

1992 Nissan Pulser MOT Pass Rate

Pass rate for Pulser models manufactured in 1992, based on 31 real MOT test results.

61.3%
Pass Rate
38.7%
Fail Rate
31
Total Tests
98,266
Avg Mileage

Data from official DVSA MOT testing records

1992 Nissan Pulser MOT Analysis

The 1992 Nissan Pulser has an MOT pass rate of 61.3% based on 31 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 98,266 miles on the odometer. With a 38.7% failure rate, the 1992 Pulser is rated as "Average" for MOT reliability.

The leading cause of MOT failure for the 1992 Nissan Pulser is Suspension, responsible for 3.2% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500.

⚠ Based on limited data (31 tests)

Top failures specific to 1992 models only. The overall Pulser page may show different rankings.

What Fails Most

Suspension 3.2%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Suspension3.2%1

Failures per 10,000 Miles

avg. 98,266 mi

For every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.

Suspension0.33% per 10K mi
View as table
Mileage-normalised failure rates by category
CategoryRate / 10K miRaw %Count
Suspension0.333.2%1

Mileage Statistics

98,266
Mean
103,476
Median
90,775
25th Percentile
118,165
75th Percentile
3.94% failures per 10K miles

Mileage-adjusted failure rate — accounts for how much this model year is typically driven.

About This Data

The 1992 Nissan Pulser has an MOT pass rate of 61.3% based on 31 tests — around the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 98,266 miles on the odometer. With a 38.7% failure rate, the 1992 Pulser is rated as "Average" for MOT reliability.

If you own or are considering buying a 1992 Nissan Pulser, budget for potential repairs before each MOT. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. With an average mileage of 98,266 miles, these vehicles are in the higher-mileage bracket where wear-related failures become more common.

Suspension — 3.2% of failures

Suspension issues account for 3.2% of MOT failures on 1992 Nissan Pulser models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue