Skip to main content
Pass Your MOT

1983 Suzuki Cl50 MOT Pass Rate

Pass rate for Cl50 models manufactured in 1983, based on 60 real MOT test results.

73.3%
Pass Rate
26.7%
Fail Rate
60
Total Tests
4,656
Avg Mileage

Data from official DVSA MOT testing records

1983 Suzuki Cl50 MOT Analysis

The 1983 Suzuki Cl50 has an MOT pass rate of 73.3% based on 60 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 4,656 miles on the odometer. With a 26.7% failure rate, the 1983 Cl50 is rated as "Very Good" for MOT reliability.

The leading cause of MOT failure for the 1983 Suzuki Cl50 is Motorcycle lamps and reflectors, responsible for 3.3% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Motorcycle wheels is the second most common issue at 3.3%. Motorcycle brakes follows at 1.7%.

⚠ Based on limited data (60 tests)

Top failures specific to 1983 models only. The overall Cl50 page may show different rankings.

What Fails Most

Motorcycle lamps and reflectors 3.3%
Motorcycle wheels 3.3%
Motorcycle brakes 1.7%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Motorcycle Lamps And Reflectors3.3%2
2Motorcycle Wheels3.3%2
3Motorcycle Brakes1.7%1
4Motorcycle Suspension1.7%1

Mileage Statistics

4,656
Mean
4,497
Median
4,243
25th Percentile
5,594
75th Percentile

About This Data

The 1983 Suzuki Cl50 has an MOT pass rate of 73.3% based on 60 tests — above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 4,656 miles on the odometer. With a 26.7% failure rate, the 1983 Cl50 is rated as "Very Good" for MOT reliability.

If you own or are considering buying a 1983 Suzuki Cl50, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to motorcycle lamps and reflectors: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 4,656 miles, many of these vehicles are still in good mechanical condition.

Motorcycle lamps and reflectors — 3.3% of failures

Motorcycle lamps and reflectors issues account for 3.3% of MOT failures on 1983 Suzuki Cl50 models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Motorcycle wheels — 3.3% of failures

Motorcycle wheels issues account for 3.3% of MOT failures on 1983 Suzuki Cl50 models. Wheel failures include cracked or severely corroded alloy wheels, missing or loose wheel nuts, and wheels that are insecurely attached. These are safety-critical and relatively rare compared to tyre failures. Typical repair costs: £100–400 per wheel. Pre-MOT check: Visually inspect wheels for cracks, especially around the spokes and rim. Check that all wheel nuts are present and tightened. Look for signs of impact damage on alloy wheels.

Motorcycle brakes — 1.7% of failures

Motorcycle brakes issues account for 1.7% of MOT failures on 1983 Suzuki Cl50 models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue