1992 Volvo 400 Series MOT Pass Rate
Pass rate for 400 Series models manufactured in 1992, based on 280 real MOT test results.
Data from official DVSA MOT testing records
This page shows all 400 Series cars tested in 1992. Want to see how cars built in 1992 hold up over time?
View 1992 Volvo 400 Series vintage page → (50.0% current pass rate)1992 Volvo 400 Series MOT Analysis
The 1992 Volvo 400 Series has an MOT pass rate of 53.9% based on 280 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 78,732 miles on the odometer. With a 46.1% failure rate, the 1992 400 Series is rated as "Poor" for MOT reliability.
The leading cause of MOT failure for the 1992 Volvo 400 Series is Suspension, responsible for 24.6% of failures. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs range from £200–500. Brakes is the second most common issue at 15.4%. Body, chassis, structure follows at 14.6%.
Top failures specific to 1992 models only. The overall 400 Series page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Suspension | 24.6% | 69 |
| 2 | Brakes | 15.4% | 43 |
| 3 | Body, Chassis, Structure | 14.6% | 41 |
| 4 | Lamps, Reflectors And Electrical Equipment | 14.3% | 40 |
| 5 | Noise, Emissions And Leaks | 8.9% | 25 |
| 6 | Tyres | 8.6% | 24 |
| 7 | Visibility | 8.2% | 23 |
| 8 | Steering | 2.9% | 8 |
| 9 | Identification Of The Vehicle | 2.1% | 6 |
| 10 | Non-component Advisories | 2.1% | 6 |
| 11 | Seat Belts And Supplementary Restraint Systems | 0.7% | 2 |
Failures per 10,000 Miles
avg. 78,732 miFor every 10,000 miles driven, this shows what percentage of MOT tests fail for each category. This accounts for how far cars are actually driven, not just raw pass/fail counts.
View as table
| Category | Rate / 10K mi | Raw % | Count |
|---|---|---|---|
| Suspension | 3.13 | 24.6% | 69 |
| Brakes | 1.95 | 15.4% | 43 |
| Body & Structure | 1.86 | 14.6% | 41 |
| Lamps & Electrical | 1.81 | 14.3% | 40 |
| Noise, emissions and leaks | 1.13 | 8.9% | 25 |
| Tyres | 1.09 | 8.6% | 24 |
| Visibility | 1.04 | 8.2% | 23 |
| Steering | 0.36 | 2.9% | 8 |
| Identification of the vehicle | 0.27 | 2.1% | 6 |
| Non-component advisories | 0.27 | 2.1% | 6 |
| Seat Belts | 0.09 | 0.7% | 2 |
Mileage Statistics
Mileage-adjusted failure rate — accounts for how much this model year is typically driven.
About This Data
The 1992 Volvo 400 Series has an MOT pass rate of 53.9% based on 280 tests — below the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 78,732 miles on the odometer. With a 46.1% failure rate, the 1992 400 Series is rated as "Poor" for MOT reliability.
If you own or are considering buying a 1992 Volvo 400 Series, be prepared for above-average maintenance costs. Before your MOT, pay particular attention to suspension: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks. At 78,732 average miles, these vehicles are in the mid-range where component wear starts to become a factor.
Suspension — 24.6% of failures
Suspension issues account for 24.6% of MOT failures on 1992 Volvo 400 Series models. Suspension failures typically involve worn bushes, leaking shock absorbers, broken coil springs, and damaged suspension arms. These affect ride quality, tyre wear, and road holding. Typical repair costs: £200–500. Pre-MOT check: Look for uneven tyre wear, listen for clunking over bumps, and check if the car pulls to one side. A bouncy ride suggests worn shock absorbers. Visually inspect coil springs for cracks.
Brakes — 15.4% of failures
Brakes issues account for 15.4% of MOT failures on 1992 Volvo 400 Series models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Body, chassis, structure — 14.6% of failures
Body, chassis, structure issues account for 14.6% of MOT failures on 1992 Volvo 400 Series models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.