2007 Yamaha Quad MOT Pass Rate
Pass rate for Quad models manufactured in 2007, based on 297 real MOT test results.
Data from official DVSA MOT testing records
This page shows all Quad cars tested in 2007. Want to see how cars built in 2007 hold up over time?
View 2007 Yamaha Quad vintage page → (70.0% current pass rate)2007 Yamaha Quad MOT Analysis
The 2007 Yamaha Quad has an MOT pass rate of 81.1% based on 297 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 4,925 miles on the odometer. With a 18.9% failure rate, the 2007 Quad is rated as "Excellent" for MOT reliability.
The leading cause of MOT failure for the 2007 Yamaha Quad is Lamps, reflectors and electrical equipment, responsible for 1.0% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Brakes is the second most common issue at 0.7%. Body, chassis, structure follows at 0.3%.
Top failures specific to 2007 models only. The overall Quad page may show different rankings.
What Fails Most
What Fails on This Car?
Click a category to see specific failure items.
View as table
| Rank | Failure Category | Rate (%) | Count |
|---|---|---|---|
| 1 | Lamps, Reflectors And Electrical Equipment | 1.0% | 3 |
| 2 | Brakes | 0.7% | 2 |
| 3 | Body, Chassis, Structure | 0.3% | 1 |
Mileage Statistics
About This Data
The 2007 Yamaha Quad has an MOT pass rate of 81.1% based on 297 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 4,925 miles on the odometer. With a 18.9% failure rate, the 2007 Quad is rated as "Excellent" for MOT reliability.
If you own or are considering buying a 2007 Yamaha Quad, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 4,925 miles, many of these vehicles are still in good mechanical condition.
Lamps, reflectors and electrical equipment — 1.0% of failures
Lamps, reflectors and electrical equipment issues account for 1.0% of MOT failures on 2007 Yamaha Quad models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.
Brakes — 0.7% of failures
Brakes issues account for 0.7% of MOT failures on 2007 Yamaha Quad models. Brake-related failures include worn brake pads, corroded brake discs, leaking brake lines, and faulty brake servos. These are safety-critical components — any brake deficiency will result in an MOT fail. Typical repair costs: £150–400. Pre-MOT check: Listen for squealing or grinding noises. Check brake pedal feel — if it feels spongy or goes to the floor, have the system inspected immediately. Look at brake pad thickness through the wheel spokes (minimum 3mm).
Body, chassis, structure — 0.3% of failures
Body, chassis, structure issues account for 0.3% of MOT failures on 2007 Yamaha Quad models. Body and structure failures include excessive corrosion, sharp edges, loose panels, and damage to the vehicle frame. Rust is the primary concern, especially on older vehicles or those exposed to road salt. Typical repair costs: £100–500+. Pre-MOT check: Inspect sills, wheel arches, door bottoms, and the chassis for rust. Surface rust is acceptable but structural corrosion or holes will fail. Check that all doors, bonnet, and boot close securely.
Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.