Skip to main content
Pass Your MOT

2010 Yamaha Quad MOT Pass Rate

Pass rate for Quad models manufactured in 2010, based on 59 real MOT test results.

84.7%
Pass Rate
15.3%
Fail Rate
59
Total Tests
4,265
Avg Mileage

Data from official DVSA MOT testing records

2010 Yamaha Quad MOT Analysis

The 2010 Yamaha Quad has an MOT pass rate of 84.7% based on 59 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 4,265 miles on the odometer. With a 15.3% failure rate, the 2010 Quad is rated as "Excellent" for MOT reliability.

The leading cause of MOT failure for the 2010 Yamaha Quad is Lamps, reflectors and electrical equipment, responsible for 6.8% of failures. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs range from £5–50. Tyres is the second most common issue at 3.4%. Identification of the vehicle follows at 1.7%.

⚠ Based on limited data (59 tests)

Top failures specific to 2010 models only. The overall Quad page may show different rankings.

What Fails Most

Tyres 3.4%
Identification of the vehicle 1.7%

What Fails on This Car?

Click a category to see specific failure items.

View as table
MOT failure categories ranked by failure rate
RankFailure CategoryRate (%)Count
1Lamps, Reflectors And Electrical Equipment6.8%4
2Tyres3.4%2
3Identification Of The Vehicle1.7%1
4Suspension1.7%1

Mileage Statistics

4,265
Mean
3,293
Median
877
25th Percentile
6,384
75th Percentile

About This Data

The 2010 Yamaha Quad has an MOT pass rate of 84.7% based on 59 tests — well above the UK average for UK vehicles. Cars of this vintage present for MOT with an average of 4,265 miles on the odometer. With a 15.3% failure rate, the 2010 Quad is rated as "Excellent" for MOT reliability.

If you own or are considering buying a 2010 Yamaha Quad, you can expect reliable MOT performance overall. Before your MOT, pay particular attention to lamps, reflectors and electrical equipment: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test. With relatively low average mileage of 4,265 miles, many of these vehicles are still in good mechanical condition.

Lamps, reflectors and electrical equipment — 6.8% of failures

Lamps, reflectors and electrical equipment issues account for 6.8% of MOT failures on 2010 Yamaha Quad models. Lighting failures cover all external lights: headlights, tail lights, brake lights, indicators, fog lights, and reflectors. A single blown bulb will cause an MOT fail. This is one of the most preventable failure categories. Typical repair costs: £5–50. Pre-MOT check: Walk around the car and check every light — headlights (dipped and main beam), side lights, tail lights, brake lights, indicators, hazard lights, reverse light, rear fog light, and number plate lights. Replace any blown bulbs before the test.

Tyres — 3.4% of failures

Tyres issues account for 3.4% of MOT failures on 2010 Yamaha Quad models. Tyre failures include tread depth below the legal minimum of 1.6mm, cuts, bulges, exposed cords, and incorrect tyre pressure. Tyres are one of the most common and easiest-to-prevent MOT failures. Typical repair costs: £50–200 per tyre. Pre-MOT check: Check tread depth with a 20p coin — if the outer band is visible, the tyre is too worn. Look for bulges, cuts, or embedded objects. Ensure all tyres match the recommended size and load rating.

Identification of the vehicle — 1.7% of failures

Identification of the vehicle issues account for 1.7% of MOT failures on 2010 Yamaha Quad models. Identification failures relate to the Vehicle Identification Number (VIN) and registration plate. The VIN must be permanently displayed and legible, and the registration plate must meet British Standard formatting. Typical repair costs: £10–50. Pre-MOT check: Ensure the VIN plate is visible and legible (usually in the windscreen or under the bonnet). Check that number plates are clean, undamaged, and use the correct font and spacing.

Based on DVSA anonymised MOT test data (2005–2024). Crown copyright, Open Government Licence v3.0.

Share via WhatsApp Share on Facebook Report Issue